I don’t know the printer but looking at an image from the [link|https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on the ''panel pcb'' and is not an individually mounted switch.
The switch may be stuck in the operated position or its actuating button may be broken perhaps.
[image|2356357]
(click on image to enlarge for better viewing)
The Brother part number for the board is '''LT3173001''' and is shown as 1-2 LT3173001 1 PANEL PCB ASSY HL-L2380DW in the parts list. (The “1-2” matches the legend in the image above)
-
Here’s the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=194&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check or replace the switch, the actuator button or to replace the board if necessary. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
+
Here’s the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=194&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check or replace the switch, the actuator button or to replace the board if necessary. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you.
The service manual '''IS''' for your model so don’t get confused by the title at the top of the page I linked. Go to p.1 of the manual to see all the models that are covered by this manual.
I don’t know the printer but looking at an image from the [link|https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on the ''panel pcb'' and is not an individually mounted switch.
The switch may be stuck in the operated position or its actuating button may be broken perhaps.
[image|2356357]
(click on image to enlarge for better viewing)
The Brother part number for the board is '''LT3173001''' and is shown as 1-2 LT3173001 1 PANEL PCB ASSY HL-L2380DW in the parts list. (The “1-2” matches the legend in the image above)
-
Here’s the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check or replace the switch, the actuator button or to replace the board if necessary. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
+
Here’s the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=194&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check or replace the switch, the actuator button or to replace the board if necessary. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
The service manual '''IS''' for your model so don’t get confused by the title at the top of the page I linked. Go to p.1 of the manual to see all the models that are covered by this manual.
I don’t know the printer but looking at an image from the [link|https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on the ''panel pcb'' and is not an individually mounted switch.
The switch may be stuck in the operated position or its actuating button may be broken perhaps.
-
[image|2356357] (click on image to enlarge for better viewing)
+
[image|2356357]
+
+
(click on image to enlarge for better viewing)
The Brother part number for the board is '''LT3173001''' and is shown as 1-2 LT3173001 1 PANEL PCB ASSY HL-L2380DW in the parts list. (The “1-2” matches the legend in the image above)
-
Here’s the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check the switch, the actuator button or to replace the board if necessary. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
+
Here’s the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check or replace the switch, the actuator button or to replace the board if necessary. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
The service manual '''IS''' for your model so don’t get confused by the title at the top of the page I linked. Go to p.1 of the manual to see all the models that are covered by this manual.
I don’t know the printer but looking at an image from the [link|https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on the panel ''pcb board'' and is not an individually mounted switch. The Brother part for the board is '''LT3173001''' shown as 1-2 PANEL PCB ASSY HL-L2380DW in the parts list. (The “1-2” matches the legend in the image below)
+
I don’t know the printer but looking at an image from the [link|https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on the ''panel pcb'' and is not an individually mounted switch.
The switch may be stuck in the operated position or its actuating button may be broken perhaps.
-
[image|2356357]
+
[image|2356357] (click on image to enlarge for better viewing)
-
(click on image to enlarge for better viewing)
+
The Brother part number for the board is '''LT3173001''' and is shown as 1-2 LT3173001 1 PANEL PCB ASSY HL-L2380DW in the parts list. (The “1-2” matches the legend in the image above)
-
Here’s a link to the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check the switch, the actuator button or to replace the board. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
+
Here’s the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check the switch, the actuator button or to replace the board if necessary. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
The service manual '''IS''' for your model so don’t get confused by the title at the top of the page I linked. Go to p.1 of the manual to see all the models that are covered by this manual.
I don’t know the printer but looking at an image from the [https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on a ''pcb board. The'' Brother part for the board is '''LT3173001''' shown as ''''''1-2 PANEL PCB ASSY HL-L2380DW in the parts list. The “1-2” matches the legend in the image below
+
I don’t know the printer but looking at an image from the [link|https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on the panel ''pcb board'' and is not an individually mounted switch. The Brother part for the board is '''LT3173001''' shown as 1-2 PANEL PCB ASSY HL-L2380DW in the parts list. (The “1-2” matches the legend in the image below)
The switch may be stuck in the operated position or its actuating button may be broken perhaps.
[image|2356357]
(click on image to enlarge for better viewing)
-
Here’s a link to the relevant page of the [https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check the switch, the actuator button or to replace the board. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
+
Here’s a link to the relevant page of the [link|https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check the switch, the actuator button or to replace the board. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
The service manual '''IS''' for your model so don’t get confused by the title at the top of the page I linked. Go to p.1 of the manual to see all the models that are covered by this manual.
Hi @op1733 ,
I don’t know the printer but looking at an image from the [https://www.fortwayneprinterrepair.com/wordpress/2019/09/05/brother-hl-l2380dw-parts-list|parts list] for the printer, it appears that the Power On/Off switch is mounted on a ''pcb board. The'' Brother part for the board is '''LT3173001''' shown as ''''''1-2 PANEL PCB ASSY HL-L2380DW in the parts list. The “1-2” matches the legend in the image below
The switch may be stuck in the operated position or its actuating button may be broken perhaps.
[image|2356357]
(click on image to enlarge for better viewing)
Here’s a link to the relevant page of the [https://www.manualslib.com/manual/1067233/Brother-Dcp-7080.html?page=191&term=panel+unit&selected=1#manual|service manual] that shows how to remove the panel unit so that you can access the board to check the switch, the actuator button or to replace the board. Replacement boards are available online. Just search for '''LT3173001''' to get results for suppliers that suit you. If you replace the board take heed of the ''Note'' at the bottom of p.191 in the service manual.
The service manual '''IS''' for your model so don’t get confused by the title at the top of the page I linked. Go to p.1 of the manual to see all the models that are covered by this manual.
Hopefully this is of some help.