I've installed a new laser in my PS2 Slim, but it hits a hard stop point halfway when traveling on the rail and won't read discs.
I have removed the solder blob, so the disc spins but the laser can only travel on the inner or outer portion of the rail and hits a hard stop when trying to move further. I've replaced two lasers before with no issue, this is a first for me seeing this issue.
+
+
=== Update (11/12/2020) ===
+
[image|2253653]
+
+
Here’s an image of the bottom of the defective unit for reference. The new working laser I received didn’t have these.
I've installed a new laser in my PS2 Slim, but it hits a hard stop point halfway when traveling on the rail and won't read discs.
I have removed the solder blob, so the disc spins but the laser can only travel on the inner or outer portion of the rail and hits a hard stop when trying to move further. I've replaced two lasers before with no issue, this is a first for me seeing this issue.
I've installed a new laser in my PS2 Slim, but it hits a hard stop point halfway when traveling on the rail and won't read discs.
I have removed the solder blob, so the disc spins but the laser can only travel on the inner or outer portion of the rail and hits a hard stop when trying to move further. I've replaced two lasers before with no issue, this is a first for me seeing this issue.
I've installed a new laser in my PS2 Slim, but it hits a hard stop point halfway when traveling on the rail and won't read discs.
I have removed the solder blob, so the disc spins but the laser can only travel on the inner or outer portion of the rail and hits a hard stop when trying to move further. I've replaced two lasers before with no issue, this is a first for me seeing this issue.