@jonascox not impressed with the spin speed and that noise seems to be unusual as well. Could be transmission clutch issue. Let us know what you have checked and verify that this is a MVWB765FW
=== Update (10/24/2020) ===
@jonascox if you would have a blockage then it would do that during any drain cycle, which it does not. It just does not spin enough and thus leaves your laundry wet. Good thing you already checked the drain etc. Have you had a chance to take a look at the motor etc. or have you disassembled anything yet? If so post some good pictures with your QUESTION. [guide|21499]
In the meantime let me check the manual :-)
=== Update (10/24/2020) ===
@jonascox here is the tech sheet for your washer.[document|24835] Run the diagnostics and see if it pops an error code.
-
I wonder if the noise originates from the hub underneath the washplate. You would have to remove it and see if the teeth have ground down. You can replace the hub.
+
I wonder if the noise originates from the hub underneath the washplate. You would have to remove it and see if the teeth have ground down. You can replace the hub.
+
+
=== Update (10/24/2020) ===
+
[https://www.amazon.com/W10721967-Splutch-Replacement-Maytag-MVWX655DW0/dp/B084H551RP|This is] the splutch kit that most likely is the culprit. [https://www.youtube.com/watch?v=H_el0y2y8qk|This video] should be very similar to your washer
@jonascox not impressed with the spin speed and that noise seems to be unusual as well. Could be transmission clutch issue. Let us know what you have checked and verify that this is a MVWB765FW
=== Update (10/24/2020) ===
@jonascox if you would have a blockage then it would do that during any drain cycle, which it does not. It just does not spin enough and thus leaves your laundry wet. Good thing you already checked the drain etc. Have you had a chance to take a look at the motor etc. or have you disassembled anything yet? If so post some good pictures with your QUESTION. [guide|21499]
In the meantime let me check the manual :-)
=== Update (10/24/2020) ===
-
@jonascox here is the tech sheet for your washer.[document|24835] I wonder if the noise originates from the hub underneath the washplate. You would have to remove it and see if the teeth have ground down. You can replace the hub.
+
@jonascox here is the tech sheet for your washer.[document|24835] Run the diagnostics and see if it pops an error code.
+
+
I wonder if the noise originates from the hub underneath the washplate. You would have to remove it and see if the teeth have ground down. You can replace the hub.
@jonascox not impressed with the spin speed and that noise seems to be unusual as well. Could be transmission clutch issue. Let us know what you have checked and verify that this is a MVWB765FW
=== Update (10/24/2020) ===
@jonascox if you would have a blockage then it would do that during any drain cycle, which it does not. It just does not spin enough and thus leaves your laundry wet. Good thing you already checked the drain etc. Have you had a chance to take a look at the motor etc. or have you disassembled anything yet? If so post some good pictures with your QUESTION. [guide|21499]
In the meantime let me check the manual :-)
+
+
=== Update (10/24/2020) ===
+
@jonascox here is the tech sheet for your washer.[document|24835] I wonder if the noise originates from the hub underneath the washplate. You would have to remove it and see if the teeth have ground down. You can replace the hub.
@jonascox not impressed with the spin speed and that noise seems to be unusual as well. Could be transmission clutch issue. Let us know what you have checked and verify that this is a MVWB765FW
+
+
=== Update (10/24/2020) ===
+
@jonascox if you would have a blockage then it would do that during any drain cycle, which it does not. It just does not spin enough and thus leaves your laundry wet. Good thing you already checked the drain etc. Have you had a chance to take a look at the motor etc. or have you disassembled anything yet? If so post some good pictures with your QUESTION. [guide|21499]
@jonascox not impressed with the spin speed and that noise seems to be unusual as well. Could be transmission clutch issue. Let us know what you have checked and verify that this is a MVWB765FW