I assume that it is a Marco UP12E, is this correct? According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
+
I assume that it is a [https://www.keoghsmarine.com.au/marco-up12-e-water-pressure-pump-12-24-volt-36l-min-36psi-freshwater-pressure-system-with-gear-pump-suits-16mm-hose-16468115-410852|Marco UP12E], is this correct? According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
See table on p.13 regarding the wiring specifications If the wiring is not adequate there may not be the correct voltage at the pump terminals.
I assume that it is a [https://www.keoghsmarine.com.au/marco-up12-e-water-pressure-pump-12-24-volt-36l-min-36psi-freshwater-pressure-system-with-gear-pump-suits-16mm-hose-16468115-410852|Marco UP12E, is this correct?
-
-
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E%20Manual.pdf] there are two warnings that use both LEDs. One says that:
+
I assume that it is a Marco UP12E, is this correct? According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
See table on p.13 regarding the wiring specifications If the wiring is not adequate there may not be the correct voltage at the pump terminals.
I assume that it is a [https://www.keoghsmarine.com.au/marco-up12-e-water-pressure-pump-12-24-volt-36l-min-36psi-freshwater-pressure-system-with-gear-pump-suits-16mm-hose-16468115-410852|Marco UP12E, is this correct?
-
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
+
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E%20Manual.pdf] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
-
See p.15-16 regarding the wiring specifications and the connections to the pump motor. If the wiring is not adequate there may not be the correct voltage at the pump terminals.
+
See table on p.13 regarding the wiring specifications If the wiring is not adequate there may not be the correct voltage at the pump terminals.
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct?
+
I assume that it is a [https://www.keoghsmarine.com.au/marco-up12-e-water-pressure-pump-12-24-volt-36l-min-36psi-freshwater-pressure-system-with-gear-pump-suits-16mm-hose-16468115-410852|Marco UP12E, is this correct?
-
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E_DX%20DUAL%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
+
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
See p.15-16 regarding the wiring specifications and the connections to the pump motor. If the wiring is not adequate there may not be the correct voltage at the pump terminals.
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct? If so it appears that it needs a 24V supply
+
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct?
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E_DX%20DUAL%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
See p.15-16 regarding the wiring specifications and the connections to the pump motor. If the wiring is not adequate there may not be the correct voltage at the pump terminals.
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct? If so it needs a 24V supply
+
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct? If so it appears that it needs a 24V supply
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E_DX%20DUAL%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
See p.15-16 regarding the wiring specifications and the connections to the pump motor. If the wiring is not adequate there may not be the correct voltage at the pump terminals.
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct?
+
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct? If so it needs a 24V supply
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E_DX%20DUAL%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
See p.15-16 regarding the wiring specifications and the connections to the pump motor. If the wiring is not adequate there may not be the correct voltage at the pump terminals.
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct?
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E_DX%20DUAL%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
-
See p.15-16 regarding the wiring specifications and the connections to the pump motor
+
See p.15-16 regarding the wiring specifications and the connections to the pump motor. If the wiring is not adequate there may not be the correct voltage at the pump terminals.
Hi @patrickdl ,
I assume that it is a [https://www.keoghsmarine.com.au/index.php?route=product/product&product_id=7207|Marco UP12E-DX], is this correct?
According to p.12 of the [http://www.keoghsmarine.com.au/image/catalog/PDF/UP12-E_DX%20DUAL%20Manual.pdf|user manual] there are two warnings that use both LEDs. One says that:
''Yellow and blue LED that blink together indicate that the power supply is providing the wrong voltage. Please check to have the correct wire section for the power supply and a charged battery, if present''.
See p.15-16 regarding the wiring specifications and the connections to the pump motor