Here’s the section in the [https://servicemanuals.us/lg/washing-machine/wt1001cw.html?start=45|service manual] that deals with the pump for the washer.
Since you have replaced the control board and had more problems you may have to reinstall the original control board as I assume the only problem you had when that was installed was that the washer wouldn’t drain and that there were no other problems.
Also as you have replaced the drain pump as well the problem looks like it is in the harness wiring or connectors between the control board and the pump
I realize that this manual is difficult to view online as you have to always select the number of the page below the document box to go to the next page but to download the file you have to “register” with the website.
Here’s the section in the [https://servicemanuals.us/lg/washing-machine/wt1001cw.html?start=45|service manual] that deals with the pump for the washer.
-
''If it is not'', please verify the model number as the one you posted shows no results and ignore the following.
+
Since you have replaced the control board and had more problems you may have to reinstall the original control board as I assume the only problem you had when that was installed was that the washer wouldn’t drain and that there were no other problems.
-
''If it is'', here’s the [https://servlib.com/lg/washing-machine/wd-1004c.html|service manual]for the washer.
+
Also as you have replaced the drain pump as well the problem looks like it is in the harness wiring or connectors between the control board and the pump
-
You may have to reinstall the original control board as I assume the only problem you had when that was installed was that the washer wouldn’t drain and that there were no other problems.
-
-
Here’s an image taken from the manual that shows the ''machine cannot empty the water'' troubleshooting flowchart.
-
-
[image|2134808]
-
-
(click on image to enlarge for better viewing).
-
-
The program timer contact position mentioned in the flowchart is shown on a chart on the 1st page.
-
-
I realize that this manual is difficult to view online as you have to always select the number of the page below the document box to go to the next page and also that there is no zoom feature but to download the file you have to “register” with the website.
+
I realize that this manual is difficult to view online as you have to always select the number of the page below the document box to go to the next page but to download the file you have to “register” with the website.
Hi @ jenni.ball72
Is the model number WD1004C by any chance?
''If it is not'', please verify the model number as the one you posted shows no results and ignore the following.
''If it is'', here’s the [https://servlib.com/lg/washing-machine/wd-1004c.html|service manual] for the washer.
You may have to reinstall the original control board as I assume the only problem you had when that was installed was that the washer wouldn’t drain and that there were no other problems.
Here’s an image taken from the manual that shows the ''machine cannot empty the water'' troubleshooting flowchart.
[image|2134808]
(click on image to enlarge for better viewing).
The program timer contact position mentioned in the flowchart is shown on a chart on the 1st page.
I realize that this manual is difficult to view online as you have to always select the number of the page below the document box to go to the next page and also that there is no zoom feature but to download the file you have to “register” with the website.
Hopefully this is of some help