# Take off the bands, so you have just the watch to work with.
# Look at the screws, you might get away with a small flat head screw driver to open. But if you have one of iFixit 64 bit kits, that would be better. Take off all 4 screws.
# Use a prying tool to open the watch between the seams to open it. Be gentle yet firm. You’ll hear clicks as you open it from the clips that hold’s the case in place.
# Replace glass
# Clip back casing back together.
# Screw back in the 4 screws to the casing.
You can buy the entire back cover for about $20 or $13 for the glass. Make sure you get the adhesive with it so it can retain its water resistance.
Hope this helps you.
-
-
-
P.S. After I answered this I noticed the title said “phone”, but you have an image of a Samsung Gear S2 watch. The answer is for the watch. If you need help fixing the rear glass of a phone please list what phone that would be. Thanks.
+
P.S. After I answered this I noticed the title said “phone”, but you have an image of a Samsung Gear S2 watch and the body of your questions mentions watch. The answer is for the watch. If you need help fixing the rear glass of a phone please list what phone that would be. Thanks.
# Take off the bands, so you have just the watch to work with.
# Look at the screws, you might get away with a small flat head screw driver to open. But if you have one of iFixit 64 bit kits, that would be better. Take off all 4 screws.
# Use a prying tool to open the watch between the seams to open it. Be gentle yet firm. You’ll hear clicks as you open it from the clips that hold’s the case in place.
# Replace glass
# Clip back casing back together.
# Screw back in the 4 screws to the casing.
-
You can buy the entire back cover for about $20 or $13 for the glass. Make sure you get the adhesive with it so it can retain its water resistance.
Hope this helps you.
+
+
+
+
P.S. After I answered this I noticed the title said “phone”, but you have an image of a Samsung Gear S2 watch. The answer is for the watch. If you need help fixing the rear glass of a phone please list what phone that would be. Thanks.
# Take off the bands, so you have just the watch to work with.
# Look at the screws, you might get away with a small flat head screw driver to open. But if you have one of iFixit 64 bit kits, that would be better. Take off all 4 screws.
# Use a prying tool to open the watch between the seams to open it. Be gentle yet firm. You’ll hear clicks as you open it from the clips that hold’s the case in place.
# Replace glass
# Clip back casing back together.
# Screw back in the 4 screws to the casing.
You can buy the entire back cover for about $20 or $13 for the glass. Make sure you get the adhesive with it so it can retain its water resistance.
Hope this helps you.