hello[br]
i have also questions about problems with the cpus not detected,[br]
the no-booting mac :-([br]
[br]
have to check if the processors are already working [br]
have to check if no pins are bent on the socket under a cpu[br]
[br]
i found that.. [br]
https://www.imore.com/how-upgrade-your-older-mac-pro-cpu?fbclid=IwAR0cgwcNLZmprF5dVo-XFmdwa8SFngDFxSPCixHdDk-cHO_bfaevcSxT1Ok[br]
[br]
1) the black connectors of the heatsinkers , [br]
have to be reseated (a little bit out of their original position).[br]
to be perfectly connected.[br]
[br]
2) doing this tricky operation… NEVER OVERTIGHTEN the springscrews when seating back the sinkers. [br]
cross pattern. never press on the top of the sinker.[br]
count the number of rotations before (when removing the sinkers),[br]
note them, and reproduce them with care [br]
[br]
3) have to respect the difference of thickness of a delidded cpu and a lidded one. (3mm or 5mm), [br]
this layer…. with 3 or 3 washers? [br]
5mm thickness of thermal strip ? he removed the original pink layer.[br]
[br]