'''++Gorazd Preloznik++''' remove as many parts from the phone as you can. You should not try to bend it back into place while leaving the motherboard, battery inside etc. Once you have removed those parts place a relatively thick round metal dowel right under the case where you see the bend crease, then try to push it back into proper position. It might take a few attempts. Of course you can also use a tool [https://www.amazon.com/Bending-Correction-Service-Framework-PanelPress/dp/B01ITONON8|like this] which should work for your phone as well. REmember that any good metal working as well as auto body shop can help you with that as well.
+
'''++Gorazd Preloznik++''' remove as many parts from the phone as you can. You should not try to bend it back into place while leaving the motherboard, battery inside etc. Once you have removed those parts place a relatively thick round metal dowel right under the case where you see the bend crease, then try to push it back into proper position. It might take a few attempts. Of course you can also use a tool [https://www.amazon.com/Bending-Correction-Service-Framework-PanelPress/dp/B01ITONON8|like this] which should work for your phone as well. Remember that any good metal working as well as auto body shop can help you with that as well.
'''++Gorazd Preloznik++''' remove as many parts from the phone as you can. You should not try to bend it back into place while leaving the motherboard, battery inside etc. Once you have removed those parts place a relatively thick round metal dowel right under the case where you see the bend crease, then try to push it back into proper position. It might take a few attempts. Of course you can also use a tool [https://www.amazon.com/Bending-Correction-Service-Framework-PanelPress/dp/B01ITONON8|like this] which should work for your phone as well. REmember that any good metal working as well as auto body shop can help you with that as well.