'''++@mezzoo++''' that is a TAB error. This happens when the Bond that holds the very thin ribbon cable that connects to the top/side of the panel fails.
Apply some pressure on the TAB that corresponds with where the line is on your screen. See if that changes anything. The attached image is just an example of what to look for.
-
[image|1186100][image|1286834]
+
[image|1186100]
+
+
[image|1286834]
+
+
I would never advice to flip the cables since it can shorten out your t-con board or your panel. It will all depend on the contacts on the t-con board. I do not recommend that
'''++@mezzoo++''' that is a TAB error. This happens when the Bond that holds the very thin ribbon cable that connects to the top/side of the panel fails.
Apply some pressure on the TAB that corresponds with where the line is on your screen. See if that changes anything. The attached image is just an example of what to look for.
'''++@mezzoo++''' tha tis a TAB error. This happens when the Bond that holds the very thin ribbon cable that connects to the top/side of the panel fails.
+
'''++@mezzoo++''' that is a TAB error. This happens when the Bond that holds the very thin ribbon cable that connects to the top/side of the panel fails.
+
+
Apply some pressure on the TAB that corresponds with where the line is on your screen. See if that changes anything. The attached image is just an example of what to look for.
'''++@mezzoo++''' tha tis a TAB error. This happens when the Bond that holds the very thin ribbon cable that connects to the top/side of the panel fails.