there are a few reasons why the Lid Locked light maybe flashing. Some of those are:
+
If you are having problems with your washing machine’s lid switch, see the [https://www.ifixit.com/Wiki/Kenmore_110_Series_Washing_Machine_Doesn%E2%80%99t_Stop_Spinning_When_Lid_Is_Opened|Kenmore 110 Series Washing Machine Doesn’t Stop Spinning When Lid Is Opened problem page] for possible causes and solutions.
-
* Lid lock light will flash if lid lock does not move into the locked position.
-
* Lid lock light will flash if motor cannot be powered on.
-
* Lid lock light will flash if not closed completely if something is blocking lid.
-
* Lid lock light can flash if another issue is detected in the washer.
+
There are a few reasons why the Lid Locked light may be flashing. Some of those are:
+
+
* The lid lock light will flash if the lid lock does not move into the locked position.
+
* The lid lock light will flash if the motor cannot be powered on.
+
* The lid lock light will flash if not closed completely if something is blocking the lid.
+
* The lid lock light can flash if another issue is detected in the washer.
For some troubleshooting start out with these steps:
-
* Check that lid lock and lid striker are clean and nothing blocks the switch.
-
* Check that the lid lock and lid striker are aligned and secure. Make sure they are tight and have not worked themselves loose.[br]
+
* Check that the lid lock and lid striker are clean and nothing blocks the switch.
+
* Check that the lid lock and lid striker are aligned and secure. Make sure they are tight and have not worked themselves loose.
+
* Check that the lid lock and lid striker are making contact with each other when the lid shuts.
+
* Check the wiring harness/connections from the lid switch to the main control assembly for damage and that it is connected properly. Check for corroded contacts.
+
If all of this checks out then check the lid switch for proper working condition.
-
* Check that the lid lock and lid striker are making contact with each other when the lid shuts.[br]
-
-
* Check the wiring harness/connections from the lid switch to the main control assembly for damage and that it is connected properly. Check for corroded contacts.[br]
-
-
If all of this checks out then check the lid switch for proper working condition.[br]
-
Depending on your exact model you want to also check that the Actuator motor it is not faulty or has loose wiring
+
Depending on your exact model you want to also check that the Actuator motor is not faulty or has loose wiring
there are a few reasons why the Lid Locked light maybe flashing. Some of those are:
* Lid lock light will flash if lid lock does not move into the locked position.
* Lid lock light will flash if motor cannot be powered on.
* Lid lock light will flash if not closed completely if something is blocking lid.
* Lid lock light can flash if another issue is detected in the washer.
-
For some troubleshooting start out with these steps:
* Check that lid lock and lid striker are clean and nothing blocks the switch.
* Check that the lid lock and lid striker are aligned and secure. Make sure they are tight and have not worked themselves loose.[br]
* Check that the lid lock and lid striker are making contact with each other when the lid shuts.[br]
* Check the wiring harness/connections from the lid switch to the main control assembly for damage and that it is connected properly. Check for corroded contacts.[br]
-
* If all of this checks out then check the lid switch for proper working condition.[br]
-
+
If all of this checks out then check the lid switch for proper working condition.[br]
Depending on your exact model you want to also check that the Actuator motor it is not faulty or has loose wiring
there are a few reasons why the Lid Locked light maybe flashing. Some of those are:
* Lid lock light will flash if lid lock does not move into the locked position.
* Lid lock light will flash if motor cannot be powered on.
* Lid lock light will flash if not closed completely if something is blocking lid.
* Lid lock light can flash if another issue is detected in the washer.
For some troubleshooting start out with these steps:
* Check that lid lock and lid striker are clean and nothing blocks the switch.
* Check that the lid lock and lid striker are aligned and secure. Make sure they are tight and have not worked themselves loose.[br]
* Check that the lid lock and lid striker are making contact with each other when the lid shuts.[br]
* Check the wiring harness/connections from the lid switch to the main control assembly for damage and that it is connected properly. Check for corroded contacts.[br]
* If all of this checks out then check the lid switch for proper working condition.[br]
Depending on your exact model you want to also check that the Actuator motor it is not faulty or has loose wiring