I have installed a Wi-fi card in my MacPro 3,1 (early 2008). However, I am a bit confised about the correct way to connect the antennas. I have found two descriptions:
1 - BT. 1 - Top
2 - Top. 2 -
3 - Bottom 3 - Bottom
BT - BT - BT
The numbers are the antenna wires. Top = the connector, on the card, closest to the drive bays. Bottom = The other connector on the card. BT = The connector on the Bluetooth card.
=== Update (07/13/2019) ===
Like this?
[image|1804169]
In addition to this, I have the original Bluetooth card.
[image|1804168]
=== Update (07/13/2019) ===
-
Hope this is better. Note that the card is actually mounted “up-side-down” so I have numbered the connections.
+
Hope this is better. Note that the card is actually mounted “up-side-down” so I have numbered the connections. 1=top, 2=bottom.
I have installed a Wi-fi card in my MacPro 3,1 (early 2008). However, I am a bit confised about the correct way to connect the antennas. I have found two descriptions:
1 - BT. 1 - Top
2 - Top. 2 -
3 - Bottom 3 - Bottom
BT - BT - BT
The numbers are the antenna wires. Top = the connector, on the card, closest to the drive bays. Bottom = The other connector on the card. BT = The connector on the Bluetooth card.
=== Update (07/13/2019) ===
Like this?
[image|1804169]
In addition to this, I have the original Bluetooth card.
[image|1804168]
+
+
=== Update (07/13/2019) ===
+
Hope this is better. Note that the card is actually mounted “up-side-down” so I have numbered the connections.
I have installed a Wi-fi card in my MacPro 3,1 (early 2008). However, I am a bit confised about the correct way to connect the antennas. I have found two descriptions:
1 - BT. 1 - Top
2 - Top. 2 -
3 - Bottom 3 - Bottom
BT - BT - BT
The numbers are the antenna wires. Top = the connector, on the card, closest to the drive bays. Bottom = The other connector on the card. BT = The connector on the Bluetooth card.
+
+
=== Update (07/13/2019) ===
+
Like this?
+
+
[image|1804169]
+
+
In addition to this, I have the original Bluetooth card.
I have installed a Wi-fi card in my MacPro 3,1 (early 2008). However, I am a bit confised about the correct way to connect the antennas. I have found two descriptions:
1 - BT. 1 - Top
2 - Top. 2 -
3 - Bottom 3 - Bottom
BT - BT - BT
The numbers are the antenna wires. Top = the connector, on the card, closest to the drive bays. Bottom = The other connector on the card. BT = The connector on the Bluetooth card.