I have an RS265LBBP side by side with water and ice in the freezer door. Ice maker works and fills bucket but ice auger does not dispense ice. After much checking of switch on dispenser, processor board, relays on board. etc., it turns out that one of the two wires going to the ice switch on the door, (the one you press to get ice), was cut. The break is inside the door wall about 3 inches from the top. I am not looking to find how to open the freezer door cavity so I can run a new wire from the ice switch to the top left connector on the freezer door. Any help?
=== Update (07/01/2019) ===
-
Meant to say "I am NOW looking to find how to open freezer door cavity" instead of "I am not looking ......."
I have an RS265LBBP side by side with water and ice in the freezer door. Ice maker works and fills bucket but ice auger does not dispense ice. After much checking of switch on dispenser, processor board, relays on board. etc., it turns out that one of the two wires going to the ice switch on the door, (the one you press to get ice), was cut. The break is inside the door wall about 3 inches from the top. I am not looking to find how to open the freezer door cavity so I can run a new wire from the ice switch to the top left connector on the freezer door. Any help?
=== Update (07/01/2019) ===
Meant to say "I am NOW looking to find how to open freezer door cavity" instead of "I am not looking ......."
I have an RS265LBBP side by side with water and ice in the freezer door. Ice maker works and fills bucket but ice auger does not dispense ice. After much checking of switch on dispenser, processor board, relays on board. etc., it turns out that one of the two wires going to the ice switch on the door, (the one you press to get ice), was cut. The break is inside the door wall about 3 inches from the top. I am not looking to find how to open the freezer door cavity so I can run a new wire from the ice switch to the top left connector on the freezer door. Any help?
=== Update (07/01/2019) ===
Meant to say "I am NOW looking to find how to open freezer door cavity" instead of "I am not looking ......."
I have an RS265LBBP side by side with water and ice in the freezer door. Ice maker works and fills bucket but ice auger does not dispense ice. After much checking of switch on dispenser, processor board, relays on board. etc., it turns out that one of the two wires going to the ice switch on the door, (the one you press to get ice), was cut. The break is inside the door wall about 3 inches from the top. I am not looking to find how to open the freezer door cavity so I can run a new wire from the ice switch to the top left connector on the freezer door. Any help?
+
+
=== Update (07/01/2019) ===
+
+
Meant to say "I am NOW looking to find how to open freezer door cavity" instead of "I am not looking ......."
I have an RS265LBBP side by side with water and ice in the freezer door. Ice maker works and fills bucket but ice auger does not dispense ice. After much checking of switch on dispenser, processor board, relays on board. etc., it turns out that one of the two wires going to the ice switch on the door, (the one you press to get ice), was cut. The break is inside the door wall about 3 inches from the top. I am not looking to find how to open the freezer door cavity so I can run a new wire from the ice switch to the top left connector on the freezer door. Any help?
I have an RS265LBBP side by side with water and ice in the freezer door. Ice maker works and fills bucket but ice auger does not dispense ice. After much checking of switch on dispenser, processor board, relays on board. etc., it turns out that one of the two wires going to the ice switch on the door, (the one you press to get ice), was cut. The break is inside the door wall about 3 inches from the top. I am not looking to find how to open the freezer door cavity so I can run a new wire from the ice switch to the top left connector on the freezer door. Any help?