heat the watch slowly to approx. 80 degrees Celsius
-
gently(!) place a opening tool between the glass and the frame of the watch and lift the glass
+
gently(!) place a opening tool between the glass and the frame of the watch and lift the glass carefully and slowly
disconnect the connectors
replace the glass
put everything together
-
WARNING: Be very carefull, since the rubber band between the glass and frame is easily damaged and you need it to seal the watch. I haven't found any spare part for this yet and I did not managed to preserve it.
+
WARNING: Be very carefull, since the rubber seal between the glass and frame is easily damaged and you need it to seal the watch. I haven't found any spare part for this yet and I did not managed to preserve it.
* heat the watch slowly to approx. 80 degrees Celsius
-
* gently(!) place a opening tool between the glass and the frame of the watch and lift the glass
-
* disconnect the connectors
-
* replace the glass and put everything together
-
Be very carefull, since the rubber band between the glass and frame is easily damaged. I haven't found any spare part for this yet and I did not managed to preserve it.
+
Remove the strap from the wrist
+
+
heat the watch slowly to approx. 80 degrees Celsius
+
+
gently(!) place a opening tool between the glass and the frame of the watch and lift the glass
+
+
disconnect the connectors
+
+
replace the glass
+
+
put everything together
+
+
WARNING: Be very carefull, since the rubber band between the glass and frame is easily damaged and you need it to seal the watch. I haven't found any spare part for this yet and I did not managed to preserve it.
* heat the watch slowly to approx. 80 degrees Celsius
-
* gently(!) place a opening tool between the glass and the frame of the watch and lift the glass
-
* disconnect the connectors
* replace the glass and put everything together
-
Be very carefull, since the rubber band between the glass and frame is easily damaged. I haven't found any spare part for this yet and I did not managed to preserve it.
* Remove the strap from the wrist
* heat the watch slowly to approx. 80 degrees Celsius
* gently(!) place a opening tool between the glass and the frame of the watch and lift the glass
* disconnect the connectors
* replace the glass and put everything together
Be very carefull, since the rubber band between the glass and frame is easily damaged. I haven't found any spare part for this yet and I did not managed to preserve it.