To revert your currently brick mod back to the stock firmware you need to download the Nuvoton firmware update software from [https://www.smoktech.com/faq/365|Smok’s website] and the [https://drive.google.com/file/d/1yXks2HjRFKLA5tq5T3fA9IxW4fqD4j5z/view|original firmware bin file].
-
# Remove the battery from your Smok device
-
# Open Nuvoton NuMicro ISP Programming Tool 2.00
-
#
+
+
Remove the battery from your Smok device
+
+
Open Nuvoton NuMicro ISP Programming Tool 2.00
[image|1681891]
-
# Hold the fire button on your Smok device and connect to you computer using the micro-usb cable (you have to hold the fire button during the entire process)
-
# Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen
+
Hold the fire button on your Smok device and connect to you computer using the micro-usb cable (you have to hold the fire button during the entire process)
-
#
+
Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen
[image|1681898]
-
# Click on '''APROM''' and select the stock firmware .bin file you have downloaded and ☑ the following
-
-
#
+
Click on '''APROM''' and select the stock firmware .bin file you have downloaded and ☑ the following
[image|1681897]
-
# Click '''Start''' and your device should be fixed
Thanks to Danillo for solving this problem.
To revert your currently brick mod back to the stock firmware you need to download the Nuvoton firmware update software from [https://www.smoktech.com/faq/365|Smok’s website] and the [https://drive.google.com/file/d/1yXks2HjRFKLA5tq5T3fA9IxW4fqD4j5z/view|original firmware bin file].
# Remove the battery from your Smok device
# Open Nuvoton NuMicro ISP Programming Tool 2.00
#
[image|1681891]
# Hold the fire button on your Smok device and connect to you computer using the micro-usb cable (you have to hold the fire button during the entire process)
# Once device is connected to the computer you should get a device connected notification on your computer. On the Nuvoton window click '''Continue''' and then '''Connect''' on the next screen
#
[image|1681898]
# Click on '''APROM''' and select the stock firmware .bin file you have downloaded and ☑ the following
#
[image|1681897]
# Click '''Start''' and your device should be fixed
#
[image|1681901]