First unplug the machine for five minutes to allow it to reset. This failing, please tell us of any error codes you may be getting now.
+
First unplug the machine for five minutes to allow it to reset. This failing, please tell us of any error codes you may be getting nowUpdate
+
+
since you got a power surge, check the
+
+
'''Line Fuse'''
+
+
The line fuse blows if the washer circuits are overloaded. If the line fuse blows, the washer won’t start. To determine if the line fuse is at fault, use a multimeter to test it for continuity. If the fuse does not have continuity, replace it. In addition, you should investigate and resolve the problem that caused the fuse to blow. Check for shorted out components such as the wires, motor, or drain pump. If you don’t resolve the underlying issue, the new fuse will blow too.
+
+
'''Incoming Power Problem'''
+
+
The electrical outlet may not be getting power. To determine if the outlet is getting power, try plugging something else into the outlet. If the outlet is not getting power, check the home circuit breakers or fuses.