Was it working OK on both devices before you had to repair it?
As not all devices are wired the same, it may be simply a case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
Here’s an image showing the two ''main'' wiring conventions being used.
[image|1557520]
(Click on image to enlarge for better viewing)
Here’s an image showing the wiring convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
If you wire the headphones to one convention, (perhaps the way that works for the device(s) that you use the most), you could use [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|this-example only] with the headset when necessary, so that the headphones will work with any device that is wired for the other convention.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
+
As not all devices are wired the same, it may be simply a case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
-
Here’s an image showing the two ''main'' wiring conventions used.
+
Here’s an image showing the two ''main'' wiring conventions being used.
[image|1557520]
(Click on image to enlarge for better viewing)
Here’s an image showing the wiring convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
If you wire the headphones to one convention, (perhaps the way that works for the device(s) that you use the most), you could use [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|this-example only] with the headset when necessary, so that the headphones will work with any device that is wired for the other convention.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
Here’s an image showing the two ''main'' wiring conventions used.
[image|1557520]
(Click on image to enlarge for better viewing)
Here’s an image showing the wiring convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
-
If you wire the headphones to one convention, (perhaps for the device(s) that you use the most), you could use [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|this-example only] with the headset when necessary, so that the headphones will work with any device that is wired for the other convention.
+
If you wire the headphones to one convention, (perhaps the way that works for the device(s) that you use the most), you could use [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|this-example only] with the headset when necessary, so that the headphones will work with any device that is wired for the other convention.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
-
Here’s an image showing the two ''main'' conventions used.
+
Here’s an image showing the two ''main'' wiring conventions used.
[image|1557520]
(Click on image to enlarge for better viewing)
-
Here’s an image showing the convention used by Apple
+
Here’s an image showing the wiring convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
-
If you wire the headphones to one convention, you could use [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|this-example only] with the headset when necessary, so that the headphones will work with any device that is wired for the other.
+
If you wire the headphones to one convention, (perhaps for the device(s) that you use the most), you could use [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|this-example only] with the headset when necessary, so that the headphones will work with any device that is wired for the other convention.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
Here’s an image showing the two ''main'' conventions used.
[image|1557520]
(Click on image to enlarge for better viewing)
Here’s an image showing the convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
-
If you wire the headphones to one convention, you could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset, when necessary, so that the headphones will work with any device that is wired for the other.
+
If you wire the headphones to one convention, you could use [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|this-example only] with the headset when necessary, so that the headphones will work with any device that is wired for the other.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
Here’s an image showing the two ''main'' conventions used.
[image|1557520]
(Click on image to enlarge for better viewing)
Here’s an image showing the convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
-
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset, when necessary, so that the headphones will work with any device.
+
If you wire the headphones to one convention, you could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset, when necessary, so that the headphones will work with any device that is wired for the other.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
Here’s an image showing the two ''main'' conventions used.
[image|1557520]
(Click on image to enlarge for better viewing)
Here’s an image showing the convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
-
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device.
+
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset, when necessary, so that the headphones will work with any device.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers.
+
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers so that it works in one device and not in the other.
-
Here’s an image showing the two ''main'' conventions.
+
Here’s an image showing the two ''main'' conventions used.
[image|1557520]
(Click on image to enlarge for better viewing)
Here’s an image showing the convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
-
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device that uses a TRRS socket.
+
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers.
Here’s an image showing the two ''main'' conventions.
+
[image|1557520]
+
(Click on image to enlarge for better viewing)
-
Here’s an image showing the Apple convention
+
Here’s an image showing the convention used by Apple
[image|1557511]
(Click on image to enlarge for better viewing)
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device that uses a TRRS socket.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers.
-
Here’s an image showing the two ''main'' conventions. Some manufacturers have a proprietary wiring scheme to force people into buying their replacement parts so that it will work on their equipment. Unless you have a DMM of course ;-)
-
-
[image|1557510]
+
Here’s an image showing the two ''main'' conventions.
(Click on image to enlarge for better viewing)
Here’s an image showing the Apple convention
[image|1557511]
(Click on image to enlarge for better viewing)
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device that uses a TRRS socket.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers.
-
Here’s an image showing the two ''main'' conventions. Some manufacturers have a proprietary wiring scheme to force people into buying their replacement parts so that it will work on their equipment
+
Here’s an image showing the two ''main'' conventions. Some manufacturers have a proprietary wiring scheme to force people into buying their replacement parts so that it will work on their equipment. Unless you have a DMM of course ;-)
[image|1557510]
(Click on image to enlarge for better viewing)
Here’s an image showing the Apple convention
[image|1557511]
(Click on image to enlarge for better viewing)
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device that uses a TRRS socket.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers.
-
Here’s an image showing the two conventions
+
Here’s an image showing the two ''main'' conventions. Some manufacturers have a proprietary wiring scheme to force people into buying their replacement parts so that it will work on their equipment
[image|1557510]
(Click on image to enlarge for better viewing)
Here’s an image showing the Apple convention
[image|1557511]
(Click on image to enlarge for better viewing)
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device that uses a TRRS socket.
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers.
Here’s an image showing the two conventions
[image|1557510]
(Click on image to enlarge for better viewing)
Here’s an image showing the Apple convention
[image|1557511]
(Click on image to enlarge for better viewing)
-
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] so that the headphones will work with any device that uses a TRRS socket.
+
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] with the headset so that the headphones will work with any device that uses a TRRS socket.
Hi @nutellanerd ,
It may be a simple case of the earth and mic being reversed due to the different wiring conventions used by manufacturers.
Here’s an image showing the two conventions
[image|1557510]
(Click on image to enlarge for better viewing)
Here’s an image showing the Apple convention
[image|1557511]
(Click on image to enlarge for better viewing)
You could use one of [https://www.cablechick.com.au/cables/35mm-4-pole-trrs-standards-bi-directional-adapter-ctia-to-omtp.html|these -example only] so that the headphones will work with any device that uses a TRRS socket.