Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
+
Are you referring to messages left on the answering system in the phone or voicemail messages left in the phone service provider’s voice mailbox for your phone service (if you have this setup)?
'''If it is a voicemail message,''' ''who is your phone service provider''?
'''''If it is a message on the phone’s answering system''''', here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
Scroll to p.40 to view the procedures to use with the answering system in the phone.
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed.
There is an option however to call back the person who left the message if this is what you mean.
To do this:
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
'''If it is a voicemail message,''' ''who is your phone service provider''?
'''''If it is a message on the phone’s answering system''''', here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
Scroll to p.40 to view the procedures to use with the answering system in the phone.
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed.
-
It states:''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
+
There is an option however to call back the person who left the message if this is what you mean.
+
+
To do this:
+
+
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
'''If it is a voicemail message,''' ''who is your phone service provider''?
-
'''''If it is a message on the phone’s answering system''''', here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.Scroll to p.40 to view the procedures to use with the answering system in the phone.It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
+
'''''If it is a message on the phone’s answering system''''', here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
+
+
Scroll to p.40 to view the procedures to use with the answering system in the phone.
+
+
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed.
+
+
It states:''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
+
+
Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
-
'''''If it is a voicemail message,''' ''who is your phone service provider''?''
+
'''If it is a voicemail message,''' ''who is your phone service provider''?
'''''If it is a message on the phone’s answering system''''', here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.Scroll to p.40 to view the procedures to use with the answering system in the phone.It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
-
Here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
+
'''''If it is a voicemail message,''' ''who is your phone service provider''?''
-
Scroll to p.40 to view the procedures to use with the answering system in the phone.
-
-
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:
-
-
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
-
-
Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
+
'''''If it is a message on the phone’s answering system''''', here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.Scroll to p.40 to view the procedures to use with the answering system in the phone.It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
Here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
Scroll to p.40 to view the procedures to use with the answering system in the phone.
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
-
Note: The caller’s number should be displayed in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
+
Note: The caller’s number should be shown in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
Here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
Scroll to p.40 to view the procedures to use with the answering system in the phone.
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
-
Note: The caller’s number should be displayed in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back using the method above
+
Note: The caller’s number should be displayed in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back as it is unknown.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
Here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
Scroll to p.40 to view the procedures to use with the answering system in the phone.
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:
-
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning''
+
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning.''
+
+
Note: The caller’s number should be displayed in the display panel. If it is not there, (perhaps because it wasn’t sent forward by the caller) then you cannot call the number back using the method above
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup?
+
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup)?
Here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
Scroll to p.40 to view the procedures to use with the answering system in the phone.
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning''
Hi,
Not quite sure what you mean.
Are you referring to messages left on the answering system in the phone or voicemail messages left in the service provider’s voice mailbox for your service (if you have this setup?
Here’s a link to the [https://att.vtp-media.com/products/CL/CL4940/CL4940_CIB_i15.0_20170524.pdf|User manual] for the phone.
Scroll to p.40 to view the procedures to use with the answering system in the phone.
It doesn’t mention anything about pressing key # 1 or # 2 etc to respond to a message being reviewed. It states:
''Press '''MENU/SELECT''' to stop playback. The screen shows '''Call back'''?, then press '''MENU/SELECT to call back the caller if the caller’s number is available.''' Or press CANCEL to resume playing message from beginning''