'''++pappyjonse++''' sounds to me like you are saying you replaced the DLP chip. Something like this
[image|1525608]
-
In that case there should be some adjustments you can make from within your TV’s setting menu. The chip etc. does not provide any adjustments. There usually is no adjustment necessary after replacing the DLP IC. You did of course connect everything as it is supposed to be etc. Always double check your work. Take a look [http://www.fixyourdlp.com/2012/08/16/your-guide-to-a-new-dlp-chip-for-mitsubishi-wd-60737-rptv/|on here] and follow those instructions. Of course you do have the right chip as well as you know it is in good condition.
+
In that case there should be some adjustments you can make from within your TV’s setting menu. The chip etc. does not provide any adjustments. There usually is no adjustment necessary after replacing the DLP IC. Of course you did connect everything as it is supposed to be etc. Always double check your work. Take a look [http://www.fixyourdlp.com/2012/08/16/your-guide-to-a-new-dlp-chip-for-mitsubishi-wd-60737-rptv/|on here] and follow those instructions. Male sure that you do have the right chip as well as you know it is in good condition.
'''++pappyjonse++''' sounds to me like you are saying you replaced the DLP chip. Something like this
[image|1525608]
-
In that case there should be some adjustments you can make from within your menu. The chip etc. does not provide any adjustments.You did of course connect everything as it is supposed to be etc. Always double check your work. there usually is no adjustment necessary after replacing the DLP IC. Take a look [http://www.fixyourdlp.com/2012/08/16/your-guide-to-a-new-dlp-chip-for-mitsubishi-wd-60737-rptv/|on here] and follow those instructions. Of course you do have the right chip as well as you know it is in good condition.
+
In that case there should be some adjustments you can make from within your TV’s setting menu. The chip etc. does not provide any adjustments. There usually is no adjustment necessary after replacing the DLP IC. You did of course connect everything as it is supposed to be etc. Always double check your work. Take a look [http://www.fixyourdlp.com/2012/08/16/your-guide-to-a-new-dlp-chip-for-mitsubishi-wd-60737-rptv/|on here] and follow those instructions. Of course you do have the right chip as well as you know it is in good condition.
'''++pappyjonse++''' sounds to me like you are saying you replaced the DLP chip. Something like this
[image|1525608]
-
In that case there should be some adjustments you can make from within your menu. The chip etc. does not provide any adjustments.You did of course connect everything as it is supposed to be etc. Always double check your work. there usually is no adjustment necessary after repalcing the DLP IC. Of course you do have the right chip as well as you know it is in good condition.
+
In that case there should be some adjustments you can make from within your menu. The chip etc. does not provide any adjustments.You did of course connect everything as it is supposed to be etc. Always double check your work. there usually is no adjustment necessary after replacing the DLP IC. Take a look [http://www.fixyourdlp.com/2012/08/16/your-guide-to-a-new-dlp-chip-for-mitsubishi-wd-60737-rptv/|on here] and follow those instructions. Of course you do have the right chip as well as you know it is in good condition.
'''++pappyjonse++''' sounds to me like you are saying you replaced the DLP chip. Something like this
[image|1525608]
-
In that case there should be some adjustments you can make from within your menu. The chip etc. does not provide any adjustments. Of course you do have the right chip as well as you know it is in good condition.
+
In that case there should be some adjustments you can make from within your menu. The chip etc. does not provide any adjustments.You did of course connect everything as it is supposed to be etc. Always double check your work. there usually is no adjustment necessary after repalcing the DLP IC. Of course you do have the right chip as well as you know it is in good condition.
'''++pappyjonse++''' sounds to me like you are saying you replaced the DLP chip. Something like this
[image|1525608]
In that case there should be some adjustments you can make from within your menu. The chip etc. does not provide any adjustments. Of course you do have the right chip as well as you know it is in good condition.