crwdns2934243:0crwdne2934243:0 Sam Goldheart crwdns2934247:0crwdne2934247:0

crwdns2947189:0crwdne2947189:0:

820-2879 PP3V3_S5 short to ground

crwdns2934249:0crwdne2934249:0:

I have a reading of 69 ohms on PP3V3_S5 to ground. This is a short to ground correct? I injected 3.3 volts it pulled 0.2 amps from the supply. Nothing on the entire board got hot enough to find I looked all over. I feel 0.2 amps is not enough current draw to make anything hot. Any ideas?

crwdns2866306:0crwdne2866306:0:

MacBook Pro 13" Unibody Mid 2010

crwdns2915684:0crwdne2915684:0:

crwdns2934245:0crwdne2934245:0 iRobot

crwdns2947189:0crwdne2947189:0:

820-2879 PP3V3_S5 short to ground

crwdns2934249:0crwdne2934249:0:

I have a reading of 69 ohms on PP3V3_S5 to ground. This is a short to ground correct? I injected 3.3 volts it pulled 0.2 amps from the supply. Nothing on the entire board got hot enough to find I looked all over. I feel 0.2 amps is not enough current draw to make anything hot. Any ideas?

crwdns2866306:0crwdne2866306:0:

MacBook Pro 13" Unibody Mid 2010

crwdns2915684:0crwdne2915684:0:

crwdns2934241:0crwdne2934241:0 Michael Mulliken

crwdns2947189:0crwdne2947189:0:

820-2879 PP3V3_S5 short to ground

crwdns2934249:0crwdne2934249:0:

I have a reading of 69 ohms on PP3V3_S5 to ground. This is a short to ground correct? I injected 3.3 volts it pulled 0.2 amps from the supply. Nothing on the entire board got hot enough to find I looked all over. I feel 0.2 amps is not enough current draw to make anything hot. Any ideas?

crwdns2866306:0crwdne2866306:0:

MacBook Pro 13" Unibody Mid 2010

crwdns2915684:0crwdne2915684:0:

open