@frenchmanfl okay so you have a few T.C.O' (Oven Thermal Cutout) All TCO's are normally closed but it the bottom TCO were to open the MW would be totally. Check it with an ohmmeter for continuity. That is the one that is my prime suspect at this point . See if this document will help [document|3750] Slightly different model but identical principal
+
@frenchmanfl okay so you have a few T.C.O' (Oven Thermal Cutout) All TCO's are normally closed but it the bottom TCO were to open the MW would be totally "dead". Check it with an ohmmeter for continuity. That is the one that is my prime suspect at this point . See if this document will help [document|3750] Slightly different model but identical principal
@frenchmanfl okay so you have a few T.C.O' (Oven Thermal Cutout) All TCO's are normally closed but it the bottom TCO were to open the MW would be totally. Check it with an ohmmeter for continuity. That is the one that is my prime suspect at this point . See if this document will help [document|3750] Slightly different model but identical principal