crwdns2934243:0crwdne2934243:0
oldturkey03
crwdns2934249:0crwdne2934249:0:
| | @mario1981 check [https://www.youtube.com/watch?v=ODBdVzySaFQ|this video.] Definitely a PITA to repalce the thermostat. |
|---|
| | |
|---|
| | [image|1198431] |
|---|
| + | |
|---|
| | [image|1198439] |
|---|
| + | |
|---|
| | The steps are as follows: |
|---|
| + | |
|---|
| | Remove/install |
|---|
| + | |
|---|
| | 1 Drain coolant |
|---|
| + | |
|---|
| | 2 Release rear drive module |
|---|
| + | |
|---|
| | 3 Remove fender liner in right rear fender |
|---|
| + | |
|---|
| | 4 Remove poly-V belt |
|---|
| + | |
|---|
| | 5 Remove intake manifold (2) |
|---|
| + | |
|---|
| | 6 Unscrew nut (3) on alternator (G2) and remove charge current line (4) |
|---|
| + | |
|---|
| | 7 Remove bolt (5) on alternator (G2) on timing case cover |
|---|
| + | |
|---|
| | 8 Loosen bolt (6) and swivel alternator (G2) upwards |
|---|
| + | |
|---|
| | 9 Remove bolts (7) and lay coolant line (8) with attached coolant hoses to one side |
|---|
| + | |
|---|
| | 10 Remove bolt (9) on holder (10) on the oil pan |
|---|
| + | |
|---|
| | 11 Remove bolts(11) and pass coolant thermostat (1) under the coolant line (8) |
|---|
| + | |
|---|
| | Catch coolant in a suitable vessel. |
|---|
| + | |
|---|
| | 12 Loosen clamps (12) and detach coolant hoses (13) from coolant thermostat (1) |
|---|
| + | |
|---|
| | Note installation locations for coolant hoses (13). Installation: Replace clamps (12). |
|---|
| + | |
|---|
| | 13 Remove holder (10) on coolant thermostat (1) When replacing coolant thermostat (1). |
|---|
| + | |
|---|
| | 14 Install in the reverse order |
|---|
| + | |
|---|
| + | === Update (09/30/2017) === |
|---|
| + | |
|---|
| + | Here are the instructions [document|3423] |
|---|
crwdns2915684:0crwdne2915684:0:
open
crwdns2934245:0crwdne2934245:0
oldturkey03
crwdns2934249:0crwdne2934249:0:
| | @mario1981 check [https://www.youtube.com/watch?v=ODBdVzySaFQ|this video.] Definitely a PITA to repalce the thermostat. |
|---|
| | |
|---|
| | [image|1198431] |
|---|
| + | [image|1198439] |
|---|
| + | The steps are as follows: |
|---|
| + | Remove/install |
|---|
| + | 1 Drain coolant |
|---|
| + | 2 Release rear drive module |
|---|
| + | 3 Remove fender liner in right rear fender |
|---|
| + | 4 Remove poly-V belt |
|---|
| + | 5 Remove intake manifold (2) |
|---|
| + | 6 Unscrew nut (3) on alternator (G2) and remove charge current line (4) |
|---|
| + | 7 Remove bolt (5) on alternator (G2) on timing case cover |
|---|
| + | 8 Loosen bolt (6) and swivel alternator (G2) upwards |
|---|
| + | 9 Remove bolts (7) and lay coolant line (8) with attached coolant hoses to one side |
|---|
| + | 10 Remove bolt (9) on holder (10) on the oil pan |
|---|
| + | 11 Remove bolts(11) and pass coolant thermostat (1) under the coolant line (8) |
|---|
| + | Catch coolant in a suitable vessel. |
|---|
| + | 12 Loosen clamps (12) and detach coolant hoses (13) from coolant thermostat (1) |
|---|
| + | Note installation locations for coolant hoses (13). Installation: Replace clamps (12). |
|---|
| + | 13 Remove holder (10) on coolant thermostat (1) When replacing coolant thermostat (1). |
|---|
| + | 14 Install in the reverse order |
|---|
crwdns2915684:0crwdne2915684:0:
open
crwdns2934241:0crwdne2934241:0
oldturkey03
crwdns2934249:0crwdne2934249:0:
@mario1981 check [https://www.youtube.com/watch?v=ODBdVzySaFQ|this video.] Definitely a PITA to repalce the thermostat.
[image|1198431]
crwdns2915684:0crwdne2915684:0:
open