@madmax9 I would try to adjust the carb. You want to start with the air/fuel mixture screw first. Also check your float height and make sure that the level is right and that the needle valve is not stuck. I suggest to download the service manual for your moped [[Topic:Suzuki FA50 Moped|from here]] (bottom of the page). Hope this helps, good luck.
+
@madmax9 I would try to clean and adjust the carb. You want to start with the air/fuel mixture screw first. Also check your float height and make sure that the level is right and that the needle valve is not stuck. I suggest to download the service manual for your moped [[Topic:Suzuki FA50 Moped|from here]] (bottom of the page). Hope this helps, good luck.
@madmax9 I would try to adjust the carb. You want to start with the air/fuel mixture screw first. Also check your float height and make sure that the level is right and that the needle valve is not stuck. I suggest to download the service manual for your moped [[Topic:Suzuki FA50 Moped|from here]] (bottom of the page). Hope this helps, good luck.
[image|206755]