My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
-
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
-
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in the picture. Sorry my phone's camera isnt the best.
https://i.imgur.com/Bd2h65G.jpg
=== Update (06/09/2017) ===
-
Yes oldturkey03, I am not showing any voltage on the relay you marked in the picture above. No 125v, no 220v...just 0.
Do you think it could be the fuse at the board that's blown?
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in the picture. Sorry my phone's camera isnt the best.
https://i.imgur.com/Bd2h65G.jpg
=== Update (06/09/2017) ===
Yes oldturkey03, I am not showing any voltage on the relay you marked in the picture above. No 125v, no 220v...just 0.
Do you think it could be the fuse at the board that's blown?
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in the picture. Sorry my phone's camera isnt the best.
https://i.imgur.com/Bd2h65G.jpg
=== Update (06/09/2017) ===
Yes oldturkey03, I am not showing any voltage on the relay you marked in the picture above. No 125v, no 220v...just 0.
Do you think it could be the fuse at the board that's blown?
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in the picture. Sorry my phone's camera isnt the best.
https://i.imgur.com/Bd2h65G.jpg
=== Update (06/09/2017) ===
Yes oldturkey03, I am not showing any voltage on the relay you marked in the picture above. No 125v, no 220v...just 0.
Do you think it could be the fuse at the board that's blown?
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in the picture. Sorry my phone's camera isnt the best.
https://i.imgur.com/Bd2h65G.jpg
+
+
=== Update (06/09/2017) ===
+
+
Yes oldturkey03, I am not showing any voltage on the relay you marked in the picture above. No 125v, no 220v...just 0.
+
+
Do you think it could be the fuse at the board that's blown?
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
-
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in picture 1. Sorry my phone's camera isnt the best.
+
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in the picture. Sorry my phone's camera isnt the best.
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
-
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in picture 1. Sorry my phone's camera isnt the best so i took 8 pics.
-
[image|1140739]
-
https://i.imgur.com/tzZq6ND.jpg
-
[image|1140740]
-
https://i.imgur.com/wzdR4Y8.jpg
-
[image|1140741]
-
https://i.imgur.com/75zAxxd.jpg
-
[image|1140743]
-
https://i.imgur.com/gpaRiD7.jpg
-
[image|1140742]
-
https://i.imgur.com/Goy6EDA.jpg
-
[image|1140736]
+
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in picture 1. Sorry my phone's camera isnt the best.
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
[image|1140658]
https://i.imgur.com/LJde7hq.jpg
[image|1140659]
https://i.imgur.com/s0NJOsd.jpg
=== Update (06/09/2017) ===
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in picture 1. Sorry my phone's camera isnt the best so i took 8 pics.
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?
=== Update (06/09/2017) ===
Is this the fuse?:
+
[image|1140658]
+
https://i.imgur.com/LJde7hq.jpg
+
[image|1140659]
+
https://i.imgur.com/s0NJOsd.jpg
+
+
=== Update (06/09/2017) ===
+
+
I don't see any fuse from noise filter to board. I do see what i think is the fuse in the board. I circled it in picture 1. Sorry my phone's camera isnt the best so i took 8 pics.
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
-
The outlet, the plug and th cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
+
The outlet, the plug and the cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
My front load washer isn't powering on - How to diagnose?
crwdns2934249:0crwdne2934249:0:
My Samsung front load washer (wf0500nce) suddenly wouldn't turn on - press the power bottom and nothing happens - no lights, no life.
The outlet, the plug and th cable are all fine. I took out the door switch and tested it for continuity and that checked out (although i am not sure if there being continuity means door switch is OK). I manually depressed the spring loaded switch to simulate the door being closed but it still wouldn't turn on.
How do i go about finding the fault?