3.) Disconnect camera cable, wi-fi antennae and display cable
4.) Take off the rubber covers and unscrew 1/3 of the torx screws that hold the display in place from each side
5.) Open the MacBook so that the display is perpendicular to the top case
6.) Remove the remaining 2/3 torx screws that hold the hinge to the top case and remove the display panel
-
7.) Once the display panel is disassembled, take off the clutch cover (black plastic piece) by moving it to the right (will take a moderate amount of force)
+
7.) Once the display panel is separated from the rest of the MacBook, take off the clutch cover (black plastic piece) by moving it to the right (will take a moderate amount of force)
8.) There will be 2 or 3 (I can't remember) torx screws on each side that hold the hinges to the display assembly, tighten these.
9.) Reassemble and reconnect the battery cable last, and you're done!
I would recommend checking out a youtube video or something if you're having trouble or are unsure.
3.) Disconnect camera cable, wi-fi antennae and display cable
4.) Take off the rubber covers and unscrew 1/3 of the torx screws that hold the display in place from each side
-
5.) Open the display panel
+
5.) Open the MacBook so that the display is perpendicular to the top case
6.) Remove the remaining 2/3 torx screws that hold the hinge to the top case and remove the display panel
7.) Once the display panel is disassembled, take off the clutch cover (black plastic piece) by moving it to the right (will take a moderate amount of force)
8.) There will be 2 or 3 (I can't remember) torx screws on each side that hold the hinges to the display assembly, tighten these.
9.) Reassemble and reconnect the battery cable last, and you're done!
I would recommend checking out a youtube video or something if you're having trouble or are unsure.
I don't have pictures, but here are the steps:
1.) Remove the bottom case cover
2.) Disconnect battery
3.) Disconnect camera cable, wi-fi antennae and display cable
4.) Take off the rubber covers and unscrew 1/3 of the torx screws that hold the display in place from each side
5.) Open the display panel
6.) Remove the remaining 2/3 torx screws that hold the hinge to the top case and remove the display panel
7.) Once the display panel is disassembled, take off the clutch cover (black plastic piece) by moving it to the right (will take a moderate amount of force)
8.) There will be 2 or 3 (I can't remember) torx screws on each side that hold the hinges to the display assembly, tighten these.
9.) Reassemble and reconnect the battery cable last, and you're done!
I would recommend checking out a youtube video or something if you're having trouble or are unsure.