martina2020 besides the things that @mayer mentiones, there are a few things that can cause this. Check the suspension kit of the drum to make sure that it is not excessively loose. Most commonly for this model is a failed rotor position sensor or a cracked stator on the motor. To check that, you will have to check the bottom on your washer. Make sure that the motor bolt is tight
+
martina2020 besides the things that @mayer mentions, there are a few things that can cause this. Check the suspension kit of the drum to make sure that it is not excessively loose. Most commonly for this model is a failed rotor position sensor or a cracked stator on the motor. To check that, you will have to check the bottom on your washer. Make sure that the motor bolt is tight
[image|1008973]
The following images show how to get to those two parts.
[image|1008980]
[image|1008979]
You do want to consider posting some images with your question. Use [guide|21499|this guide] for that. It will allow us to see what you see.
martina2020 there are a few things that can cause this. Check the suspension kit of the drum to make sure that it is not excessively loose. Most commonly for this model is a failed rotor position sensor or a cracked stator on the motor. To check that you will have to check the bottom on your washer. Make sure that the motor bolt is tight
+
martina2020 besides the things that @mayer mentiones, there are a few things that can cause this. Check the suspension kit of the drum to make sure that it is not excessively loose. Most commonly for this model is a failed rotor position sensor or a cracked stator on the motor. To check that, you will have to check the bottom on your washer. Make sure that the motor bolt is tight
[image|1008973]
The following images show how to get to those two parts.
[image|1008980]
[image|1008979]
You do want to consider posting some images with your question. Use [guide|21499|this guide] for that. It will allow us to see what you see.
martina2020 there are a few things that can cause this. Check the suspension kit of the drum to make sure that it is not excessively loose. Most commonly for this model is a failed rotor position sensor or a cracked stator on the motor. To check that you will have to check the bottom on your washer. Make sure that the motor bolt is tight
[image|1008973]
The following images show how to get to those two parts.
[image|1008980]
[image|1008979]
You do want to consider posting some images with your question. Use [guide|21499|this guide] for that. It will allow us to see what you see.