Try: '''connecting the two Power cables that were attached to the button, if not, then try giving each of the power cables a bit of a shock == (Be careful not to short your phone, DO NOT LEAVE THE CURRENT ON FOR MORE THAN about 1 SECOND) == '''
+
+
Edit 02/02/17
+
This was an idea because the power button may be jammed and this just sounded like a reasonable answer because when you connect the wires the system gets the signal to start up so try do this see what happens but try it on an old phone
Try: '''connecting the two Power cables that were attached to the button, if not, then try giving each of the power cables a bit of a shock == (Be careful not to short your phone, DO NOT LEAVE THE CURRENT ON FOR MORE THAN about 1 SECOND) == '''