With the power removed from the dishwasher, can you test the continuity of the connection from the control board to the wash pump motor?
As your motor seems to test OK (ZERO Ohms is OK apparently and it is not s/c to earth) then the power to the motor is missing either due to a wiring fault (connector problem possibly) between the control board and the motor or because of a fault on the control board, software or hardware.
Here is a link to a website where in post #2 there is a link to an attachment which I think has the tech specs and possibly the diagnostic test information. I say think because you have to register to view the attachment (Attached Images GU2700 -1.pdf).
Hopefully if you register (it seems free) you will be able to access it and get better information on testing your dishwasher.
Here is a link to the parts for your dishwasher. although it seems that you may be 1 digit short as there seem to be more model variants. It is just shown to give you an idea of the price if the control board is your problem.
+
Here is a link to the parts for your dishwasher. although it seems that you may be 1 or 2 digits short in the full number you posted as there seem to be more model variants with differing last 2 extra digits. It is just shown to give you an idea of the price if the control board is your problem.
With the power removed from the dishwasher, can you test the continuity of the connection from the control board to the wash pump motor?
As your motor seems to test OK (ZERO Ohms is OK apparently and it is not s/c to earth) then the power to the motor is missing either due to a wiring fault (connector problem possibly) between the control board and the motor or because of a fault on the control board, software or hardware.
Here is a link to a website where in post #2 there is a link to an attachment which I think has the tech specs and possibly the diagnostic test information. I say think because you have to register to view the attachment (Attached Images GU2700 -1.pdf).
Hopefully if you register (it seems free) you will be able to access it and get better information on testing your dishwasher.
Here is a link to the parts for your dishwasher. although it seems that you may be 1 digit short as there seem to be more model vbariants. It is just shown to give you an idea of the price if the control board is your problem.
+
Here is a link to the parts for your dishwasher. although it seems that you may be 1 digit short as there seem to be more model variants. It is just shown to give you an idea of the price if the control board is your problem.
With the power removed from the dishwasher, can you test the continuity of the connection from the control board to the wash pump motor?
As your motor seems to test OK (ZERO Ohms is OK apparently and it is not s/c to earth) then the power to the motor is missing either due to a wiring fault (connector problem possibly) between the control board and the motor or because of a fault on the control board, software or hardware.
Here is a link to a website where in post #2 there is a link to an attachment which I think has the tech specs and possibly the diagnostic test information. I say think because you have to register to view the attachment (Attached Images GU2700 -1.pdf).
Hopefully if you register (it seems free) you will be able to access it and get better information on testing your dishwasher.
Here is a link to the parts for your dishwasher. although it seems that you may be 1 digit short as there seem to be more models. It is just shown to give you an idea of the price if the control board is your problem.
+
Here is a link to the parts for your dishwasher. although it seems that you may be 1 digit short as there seem to be more model vbariants. It is just shown to give you an idea of the price if the control board is your problem.
Hi,
With the power removed from the dishwasher, can you test the continuity of the connection from the control board to the wash pump motor?
As your motor seems to test OK (ZERO Ohms is OK apparently and it is not s/c to earth) then the power to the motor is missing either due to a wiring fault (connector problem possibly) between the control board and the motor or because of a fault on the control board, software or hardware.
Here is a link to a website where in post #2 there is a link to an attachment which I think has the tech specs and possibly the diagnostic test information. I say think because you have to register to view the attachment (Attached Images GU2700 -1.pdf).
Hopefully if you register (it seems free) you will be able to access it and get better information on testing your dishwasher.
http://forum.appliancepartspros.com/dishwasher-repair/185751-diagnostic-help-whirlpool-dishwasher.html
Here is a link to the parts for your dishwasher. although it seems that you may be 1 digit short as there seem to be more models. It is just shown to give you an idea of the price if the control board is your problem.
http://www.appliancepartspros.com/search.aspx?model=gu2700xtsq