Scan and pdf led's both light on power up...non responsive
crwdns2934249:0crwdne2934249:0:
-
Scan unit SCAN and PDF LED's both turn on upon power up. Unit will not respond to Neat software version 5.4 or 5.7. Not yet disassembled. May have been dropped recently but no outward sign of damage.
+
The main desktop scan unit "SCAN" and "PDF" LED's found on the desktop scanner body both light green upon power up. The led buttons are not jammed. Pushing the buttons will not change the lights. Adding paper does not help. Toggling the outside on off switch does not help. Plugging the USB wire into the unit and connecting to a computer does not have any effect. The computer runs Neatworks version 5.4 and now 5.7. Toggling on the soft "scan" button in software results in gettingt a message that the scanner is not available. No amount patient switching on or off the button helps. There is no reset button visible. The unit has no fractures or loose parts within. I have poked about and pulled off the plastic paper feeder sheets to see if there is a roller/feed jam but can find nothing. There is a plastic carrier bar inside the lid of the unit. It is not jammed. it springs back and forth a bit in a normal fashion when I push on it. The unit is not yet disassembled. Recollection indicates the unit may have been dropped recently on a soft wooden floor from desk level but there is no outward sign of damage. I suspect a loose connection somewhere within. But maybe others have some experience at this effort to unjam the machine before I attack it.
Scan and pdf led's both light on power up...non responsive
crwdns2934249:0crwdne2934249:0:
Scan unit SCAN and PDF LED's both turn on upon power up. Unit will not respond to Neat software version 5.4 or 5.7. Not yet disassembled. May have been dropped recently but no outward sign of damage.