It makes it difficult to diagnose this problem since there could be a number of areas that could have gone wrong. The first area I would check is the [http://cdn3.ioffer.com/img/item/975/968/17/bVXIQ6SlaS6HRyn.jpg|button] first and ensure that it is not damaged or bent, and is properly positioned in place so that it may press the eject switch located through the bottom left hole of the xbox. Secondly I recommend checking the [http://beta.ivancover.com/wiki/images/a/a8/Xbox_360_lite-on_dvd_power_cable.png|power cable], in that, the control to open the drive is transfered through this. Make sure that the cable is not damaged and all wires in the connector are completely set in as they can come loose. Finally, if all else fails check the [http://www.blogcdn.com/www.engadget.com/media/2007/05/drive4a_engadget_howto.jpg|switch] to make sure that it is not bent back, broken or loose on the motherboard ''(or maybe missing). ''If nothing works then your best bet is that the motherboard or dirve has an issue and a fix for that is a whole different ball game.
+
It makes it difficult to diagnose this problem since there could be a number of areas that could have gone wrong. The first area I would check is the [http://www.xcm.cc/open.11.jpg|button] first and ensure that it is not damaged or bent, and is properly positioned in place so that it may press the eject switch located through the bottom left hole of the xbox. Secondly I recommend checking the [http://beta.ivancover.com/wiki/images/a/a8/Xbox_360_lite-on_dvd_power_cable.png|power cable], in that, the control to open the drive is transfered through this. Make sure that the cable is not damaged and all wires in the connector are completely set in as they can come loose. Finally, if all else fails check the [http://www.blogcdn.com/www.engadget.com/media/2007/05/drive4a_engadget_howto.jpg|switch] to make sure that it is not bent back, broken or loose on the motherboard ''(or maybe missing). ''If nothing works then your best bet is that the motherboard or dirve has an issue and a fix for that is a whole different ball game.
It makes it difficult to diagnose this problem since there could be a number of areas that could have gone wrong. The first area I would check is the [http://cdn3.ioffer.com/img/item/975/968/17/bVXIQ6SlaS6HRyn.jpg|button] first and ensure that it is not damaged or bent, and is properly positioned in place so that it may press the eject switch located through the bottom left hole of the xbox. Secondly I recommend checking the [http://beta.ivancover.com/wiki/images/a/a8/Xbox_360_lite-on_dvd_power_cable.png|power cable], in that, the control to open the drive is transfered through this. Make sure that the cable is not damaged and all wires in the connector are completely set in as they can come loose. Finally, if all else fails check the [http://www.blogcdn.com/www.engadget.com/media/2007/05/drive4a_engadget_howto.jpg|switch] to make sure that it is not bent back, broken or loose on the motherboard ''(or maybe missing). ''If nothing works then your best bet is that the motherboard or dirve has an issue and a fix for that is a whole different ball game.