Here is an image that shows how. (apologies for the poor quality)
[image|892773]
+
If that doesn't work try removing all the power from the device , press and hold the on button for 10 seconds to drain residual power, then re apply the power supplies and see if it starts normally.
-
If the reset works you may wish to check that the firmware is up to date.
+
If the reset or power refresh works you may wish to check that the firmware is up to date.
Here is a link that shows the models that the firmware is for. In it, there is a link to a guide on how to install the firmware (''take note of the precautions at the bottom of the guide'') as well as a link to download the firmware file.
Hi
Have you tried resetting the device?
Here is an image that shows how. (apologies for the poor quality)
[image|892773]
If the reset works you may wish to check that the firmware is up to date.
Here is a link that shows the models that the firmware is for. In it, there is a link to a guide on how to install the firmware (''take note of the precautions at the bottom of the guide'') as well as a link to download the firmware file.
http://www.kenwood.com/cs/ce/mm/firmware/2012/2012b/eng.html