Use a flashlight held at an angle to the screen (with the machine booted up), and see if you can discern the desktop. We're checking out the LED driver board. If it's there we want to make sure of your exact model A, to get you to the correct part and guide, B. To make sure it's not a bit of an older machine with an inverter.
+
Use a flashlight held at an angle to the screen (with the machine booted up), and see if you can discern the desktop. We're checking out the LED driver board. If the desktop is there we then want to make sure of your exact model
+
A, to get you to the correct part and guide,
+
B. To make sure it's not a bit of an older machine with an inverter.
Use a flashlight held at an angle to the screen (with the machined booted up), and see if you can discern the desktop. We're checking out the LED driver board. If it's there we want to make sure of your exact model A, to get you to the correct part and guide, B. To make sure it's not a bit of an older machine with an inverter.
+
Use a flashlight held at an angle to the screen (with the machine booted up), and see if you can discern the desktop. We're checking out the LED driver board. If it's there we want to make sure of your exact model A, to get you to the correct part and guide, B. To make sure it's not a bit of an older machine with an inverter.
Use a flashlight held at an angle to the screen (with the machined booted up), and see if you can discern the desktop.
+
Use a flashlight held at an angle to the screen (with the machined booted up), and see if you can discern the desktop. We're checking out the LED driver board. If it's there we want to make sure of your exact model A, to get you to the correct part and guide, B. To make sure it's not a bit of an older machine with an inverter.