4. While ''still holding'' the Power button ''plug in'' the power cord
5. ''Wait'' for it to start, when normal home screen displayed ''release ''the power button.
6. There should be a message to ''replace'' the tray.
Hopefully it will be good to go.
'''Update''' Try it 2 or 3 times before you give up. According to the comments below, for some it did work but only on the second or third attempt.
'''Update #2''' According to some comments below the above procedure was also successful when used on other Brother printers, laser as well as inkjet models.
Also if it does succeed here is a link which allows you to download the "Firmware Update Tool" which checks to see if there are any firmware updates for your printer. Brother doesn't say if there are or not but it never hurts to check in case they have a 'fix' available. Scroll down to Firmware.
4. While ''still holding'' the Power button ''plug in'' the power cord
5. ''Wait'' for it to start, when normal home screen displayed ''release ''the power button.
6. There should be a message to ''replace'' the tray.
Hopefully it will be good to go.
'''Update''' Try it 2 or 3 times before you give up. According to the comments below, for some it did work but only on the second or third attempt.
-
'''Update #2''' According to some comments below the above procedure was also successful when used on other Brother laser and inkjet printer models as well.
+
+
'''Update #2''' According to some comments below the above procedure was also successful when used on other Brother printers, laser as well as inkjet models.
Also if it does succeed here is a link which allows you to download the "Firmware Update Tool" which checks to see if there are any firmware updates for your printer. Brother doesn't say if there are or not but it never hurts to check in case they have a 'fix' available. Scroll down to Firmware.
4. While ''still holding'' the Power button ''plug in'' the power cord
5. ''Wait'' for it to start, when normal home screen displayed ''release ''the power button.
6. There should be a message to ''replace'' the tray.
Hopefully it will be good to go.
'''Update''' Try it 2 or 3 times before you give up. According to the comments below, for some it did work but only on the second or third attempt.
+
'''Update #2''' According to some comments below the above procedure was also successful when used on other Brother laser and inkjet printer models as well.
Also if it does succeed here is a link which allows you to download the "Firmware Update Tool" which checks to see if there are any firmware updates for your printer. Brother doesn't say if there are or not but it never hurts to check in case they have a 'fix' available. Scroll down to Firmware.
4. While ''still holding'' the Power button ''plug in'' the power cord
5. ''Wait'' for it to start, when normal home screen displayed ''release ''the power button.
6. There should be a message to ''replace'' the tray.
Hopefully it will be good to go.
-
'''Note''' Try it 2 or 3 times before you give up. According to the comments below, for some it did work but only on the second or third attempt.
+
+
'''Update''' Try it 2 or 3 times before you give up. According to the comments below, for some it did work but only on the second or third attempt.
Also if it does succeed here is a link which allows you to download the "Firmware Update Tool" which checks to see if there are any firmware updates for your printer. Brother doesn't say if there are or not but it never hurts to check in case they have a 'fix' available. Scroll down to Firmware.
4. While ''still holding'' the Power button ''plug in'' the power cord
5. ''Wait'' for it to start, when normal home screen displayed ''release ''the power button.
6. There should be a message to ''replace'' the tray.
Hopefully it will be good to go.
+
'''Note''' Try it 2 or 3 times before you give up. According to the comments below, for some it did work but only on the second or third attempt.
Also if it does succeed here is a link which allows you to download the "Firmware Update Tool" which checks to see if there are any firmware updates for your printer. Brother doesn't say if there are or not but it never hurts to check in case they have a 'fix' available. Scroll down to Firmware.
Hi,
Try the following:
1. ''Unplug'' the printer.
2. ''Remove'' the paper tray.
3. ''Press and hold'' the Power button.
4. While ''still holding'' the Power button ''plug in'' the power cord
5. ''Wait'' for it to start, when normal home screen displayed ''release ''the power button.
6. There should be a message to ''replace'' the tray.
Hopefully it will be good to go.
Also if it does succeed here is a link which allows you to download the "Firmware Update Tool" which checks to see if there are any firmware updates for your printer. Brother doesn't say if there are or not but it never hurts to check in case they have a 'fix' available. Scroll down to Firmware.
http://support.brother.com/g/b/downloadlist.aspx?c=us_ot&lang=en&prod=mfcj4510dw_us_eu_as&os=10012