'''If you are having trouble getting your tape out of the camera try a few of these steps:'''
''Make sure the battery is not drained, if so, replace or recharge the battery ''
Follow these steps:
* Turn camcorder and open cassette holder.
* Leave cassette holder open, and power off the unit
* Remove the battery.
* Power on the unit.
* Replace the battery.
* Cassette should now eject safely.
''Cassette Holder May Be Faulty''
Dis-assembly of the unit may be required. Carefully remove the cassette holder using the screws attached to the unit. Remember to keep track of all screws for reassembly. For more information, refer to the repair guide.
+
+
For more help please follow the link below to the troubleshooting page:
'''If you are having troubles getting your tape out of the camera try a few of these steps:'''
+
'''If you are having trouble getting your tape out of the camera try a few of these steps:'''
''Make sure the battery is not drained, if so, replace or recharge the battery ''
Follow these steps:
* Turn camcorder and open cassette holder.
* Leave cassette holder open, and power off the unit
* Remove the battery.
* Power on the unit.
* Replace the battery.
* Cassette should now eject safely.
''Cassette Holder May Be Faulty''
Dis-assembly of the unit may be required. Carefully remove the cassette holder using the screws attached to the unit. Remember to keep track of all screws for reassembly. For more information, refer to the repair guide.
'''If you are having troubles getting your tape out of the camera try a few of these steps:'''
''Make sure the battery is not drained, if so, replace or recharge the battery ''
Follow these steps:
* Turn camcorder and open cassette holder.
* Leave cassette holder open, and power off the unit
* Remove the battery.
-
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Power on the unit.
+
* Power on the unit.
* Replace the battery.
* Cassette should now eject safely.
''Cassette Holder May Be Faulty''
Dis-assembly of the unit may be required. Carefully remove the cassette holder using the screws attached to the unit. Remember to keep track of all screws for reassembly. For more information, refer to the repair guide.
'''If you are having troubles getting your tape out of the camera try a few of these steps:'''
''Make sure the battery is not drained, if so, replace or recharge the battery ''
Follow these steps:
-
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Turn camcorder and open cassette holder.
+
* Turn camcorder and open cassette holder.
-
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Leave cassette holder open, and power off the unit
+
* Leave cassette holder open, and power off the unit
-
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Remove the battery.
+
* Remove the battery.
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Power on the unit.
-
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Replace the battery.
+
* Replace the battery.
-
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Cassette should now eject safely.
+
* Cassette should now eject safely.
''Cassette Holder May Be Faulty''
Dis-assembly of the unit may be required. Carefully remove the cassette holder using the screws attached to the unit. Remember to keep track of all screws for reassembly. For more information, refer to the repair guide.
'''If you are having troubles getting your tape out of the camera try a few of these steps:'''
''Make sure the battery is not drained, if so, replace or recharge the battery ''
Follow these steps:
-
Turn camcorder and open cassette holder.
+
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Turn camcorder and open cassette holder.
-
Leave cassette holder open, and power off the unit
+
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Leave cassette holder open, and power off the unit
-
Remove the battery.
+
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Remove the battery.
-
Power on the unit.
+
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Power on the unit.
-
Replace the battery.
+
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Replace the battery.
-
Cassette should now eject safely.
+
* Hit <enter> to insert another list item, and <enter> twice in a row to end the list. To get subitems, repeat the bullet character once for each level of indent you want (e.g. **)Cassette should now eject safely.
''Cassette Holder May Be Faulty''
Dis-assembly of the unit may be required. Carefully remove the cassette holder using the screws attached to the unit. Remember to keep track of all screws for reassembly. For more information, refer to the repair guide.
'''If you are having troubles getting your tape out of the camera try a few of these steps:'''
''Make sure the battery is not drained, if so, replace or recharge the battery ''
Follow these steps:
Turn camcorder and open cassette holder.
Leave cassette holder open, and power off the unit
Remove the battery.
Power on the unit.
Replace the battery.
Cassette should now eject safely.
''Cassette Holder May Be Faulty''
Dis-assembly of the unit may be required. Carefully remove the cassette holder using the screws attached to the unit. Remember to keep track of all screws for reassembly. For more information, refer to the repair guide.