Unfortunately, you have to take off the clear dasher before you can completely disassemble the machine. To do this, twist the piece to the left until it comes apart from the machine. Once this is removed, you should be able to take the upper housing and lower housing apart with ease.
+
+
Here is the link to the troubleshooting guide: https://www.ifixit.com/Wiki/Sunbeam_Snow_Cone_Maker_Troubleshooting
Unfortunately, you have to take off the clear dasher before you can completely disassemble the machine. To do this, unscrew the three screws on the top and remove the piece. Once this is removed, you should be able to take the upper housing and lower housing apart with ease.
+
Unfortunately, you have to take off the clear dasher before you can completely disassemble the machine. To do this, twist the piece to the left until it comes apart from the machine. Once this is removed, you should be able to take the upper housing and lower housing apart with ease.
Unfortunately, you have to take off the clear dasher before you can completely disassemble the machine. To do this, unscrew the three screws on the top and remove the piece. Once this is removed, you should be able to take the upper housing and lower housing apart with ease.