Ndz 15, 2014
crwdns2934243:0crwdne2934243:0
oldturkey03
crwdns2934249:0crwdne2934249:0:
Troy, this is what the manual says :" 2.4L REMOVAL GENERATOR AND AIR CONDITIONING BELT (1) Raise vehicle on hoist. (2) Remove the drive belt shield (Fig. 8). WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL INJURY COULD RESULT. (3) Position a wrench on the belt tensioner lug (Fig. 3). (4) Release belt tension by rotating the tensioner clockwise (Fig. 3). (5) Remove belt. (1) Carefully return tensioner to its relaxed position. POWER STEERING PUMP - (1) From top of the vehicle, loosen locking nuts (1) - - and (2) (Fig. 4). + (1) From top of the vehicle, loosen locking nuts (1) and (2) (Fig. 4). (2) From under the vehicle, loosen the pivot bolt (3). Loosen adjusting bolt (4) until belt can be removed. [image|388832|align=center] [image|388833|align=center] [image|388835|align=center] GENERATOR AND AIR CONDITIONING BELT (1) Install belt onto all pulleys except for the crankshaft (Fig. 5). - (2) Rotate belt tensioner clockwise until belt can - - be installed onto the crankshaft pulley (Fig. 3). - + (2) Rotate belt tensioner clockwise until belt can be installed onto the crankshaft pulley (Fig. 3). Slowly release belt tensioner. - (3) Verify belt is properly routed and engaged on - - all pulleys (Fig. 5). + (3) Verify belt is properly routed and engaged on all pulleys (Fig. 5). (4) Install drive belt shield (Fig. 8) and lower vehicle. [image|388836|align=center] + DRIVE BELTS - 3.3/3.8L - DRIVE BELTS - 3.3/3.8L REMOVAL + (1) Raise vehicle on hoist. + (2) Remove the drive belt shield (Fig. 8). - [image|388840] + + [image|388840|align=center] + WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL INJURY COULD RESULT. + (3) Position a wrench on the belt tensioner lug (Fig. 9). + (4) Release belt tension by rotating the tensioner counterclockwise (Fig. 9). - [image|388841] + + [image|388841|align=center] (5) Remove the drive belt (Fig. 10). + (6) Carefully return tensioner to its relaxed position. + INSTALLATION + (1) Route and position the drive belt onto all pulleys, except for the crankshaft (Fig. 10). - [image|388842] + + [image|388842|align=center] + (2) Rotate belt tensioner counterclockwise until belt can be installed onto the crankshaft pulley (Fig.9). Slowly release belt tensioner. + (3) Verify belt is properly routed and engaged on all pulleys (Fig. 11). + (4) Install drive belt shield (Fig. 8) and lower vehicle.
crwdns2915684:0crwdne2915684:0:
open
Ndz 15, 2014
crwdns2934245:0crwdne2934245:0
oldturkey03
crwdns2934249:0crwdne2934249:0:
Troy, this is what the manual says :" 2.4L REMOVAL GENERATOR AND AIR CONDITIONING BELT (1) Raise vehicle on hoist. (2) Remove the drive belt shield (Fig. 8). WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL INJURY COULD RESULT. (3) Position a wrench on the belt tensioner lug (Fig. 3). (4) Release belt tension by rotating the tensioner clockwise (Fig. 3). (5) Remove belt. (1) Carefully return tensioner to its relaxed position. POWER STEERING PUMP (1) From top of the vehicle, loosen locking nuts (1) and (2) (Fig. 4). (2) From under the vehicle, loosen the pivot bolt (3). Loosen adjusting bolt (4) until belt can be removed. - [image|388832|align=left] + [image|388832|align=center ] - [image|388833|align=left] + [image|388833|align=center ] - [image|388835|align=left] + [image|388835|align=center ] GENERATOR AND AIR CONDITIONING BELT (1) Install belt onto all pulleys except for the crankshaft (Fig. 5). (2) Rotate belt tensioner clockwise until belt can be installed onto the crankshaft pulley (Fig. 3). Slowly release belt tensioner. (3) Verify belt is properly routed and engaged on all pulleys (Fig. 5). (4) Install drive belt shield (Fig. 8) and lower vehicle. - [image|388836|align=left] + [image|388836|align=center] + + + DRIVE BELTS - 3.3/3.8L + REMOVAL + (1) Raise vehicle on hoist. + (2) Remove the drive belt shield (Fig. 8). + [image|388840] + WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL INJURY COULD RESULT. + (3) Position a wrench on the belt tensioner lug (Fig. 9). + (4) Release belt tension by rotating the tensioner counterclockwise (Fig. 9). + [image|388841] + (5) Remove the drive belt (Fig. 10). + (6) Carefully return tensioner to its relaxed position. + INSTALLATION + (1) Route and position the drive belt onto all pulleys, except for the crankshaft (Fig. 10). + [image|388842] + (2) Rotate belt tensioner counterclockwise until belt can be installed onto the crankshaft pulley (Fig.9). Slowly release belt tensioner. + (3) Verify belt is properly routed and engaged on all pulleys (Fig. 11). + (4) Install drive belt shield (Fig. 8) and lower vehicle.
crwdns2915684:0crwdne2915684:0:
open
Ndz 15, 2014
crwdns2934241:0crwdne2934241:0
oldturkey03
crwdns2934249:0crwdne2934249:0:
Troy, this is what the manual says :"
2.4L
REMOVAL GENERATOR AND AIR CONDITIONING BELT
(1) Raise vehicle on hoist.
(2) Remove the drive belt shield (Fig. 8).
WARNING: DO NOT ALLOW DRIVE BELT TENSIONER TO SNAP BACK, AS DAMAGE TO TENSIONER AND/OR PERSONAL INJURY COULD
RESULT.
(3) Position a wrench on the belt tensioner lug (Fig. 3).
(4) Release belt tension by rotating the tensioner clockwise (Fig. 3).
(5) Remove belt.
(1) Carefully return tensioner to its relaxed position.
POWER STEERING PUMP
(1) From top of the vehicle, loosen locking nuts (1)
and (2) (Fig. 4).
(2) From under the vehicle, loosen the pivot bolt
(3). Loosen adjusting bolt (4) until belt can be removed.
[image|388832|align=left]
[image|388833|align=left]
[image|388835|align=left]
GENERATOR AND AIR CONDITIONING BELT
(1) Install belt onto all pulleys except for the
crankshaft (Fig. 5).
(2) Rotate belt tensioner clockwise until belt can
be installed onto the crankshaft pulley (Fig. 3).
Slowly release belt tensioner.
(3) Verify belt is properly routed and engaged on
all pulleys (Fig. 5).
(4) Install drive belt shield (Fig. 8) and lower vehicle.
[image|388836|align=left]
crwdns2915684:0crwdne2915684:0:
open