Check out Cody's answer for this question: https://www.ifixit.com/Answers/View/59506/Loud+Speaker+replacement+guide
You will need to remove the motherboard and solder the two speaker wires back onto the board.
Here is the teardown: [guide|3562]
-
With the side of the logic board with the chips from step 21 facing you, the red wire goes to the corner contact and blue wire connects to the contact to the adjacent contact.
+
With the side of the logic board with the chips from step 21 facing you, the red wire goes to the corner contact and blue wire connects to the adjacent contact.
Check out Cody's answer for this question: https://www.ifixit.com/Answers/View/59506/Loud+Speaker+replacement+guide
You will need to remove the motherboard and solder the two speaker wires back onto the board.
Here is the teardown: [guide|3562]
With the side of the logic board with the chips from step 21 facing you, the red wire goes to the corner contact and blue wire connects to the contact to the adjacent contact.
Check out Cody's answer for this question: https://www.ifixit.com/Answers/View/59506/Loud+Speaker+replacement+guide
You will need to remove the motherboard and solder the two speaker wires back onto the board.
Here is the teardown: [guide|3562]
-
With the side of the logic board with the chips from step 21 facing you, the red wire goes to the corner contact and blue wire connects to the contact to the adjacent contact. Checkout the image of interest from the teardown:https://d3nevzfk7ii3be.cloudfront.net/igi/xELmUCaxYLuDnJln.huge
+
With the side of the logic board with the chips from step 21 facing you, the red wire goes to the corner contact and blue wire connects to the contact to the adjacent contact.
Check out Cody's answer for this question: https://www.ifixit.com/Answers/View/59506/Loud+Speaker+replacement+guide
You will need to remove the motherboard and solder the two speaker wires back onto the board.
Here is the teardown: [guide|3562]
With the side of the logic board with the chips from step 21 facing you, the red wire goes to the corner contact and blue wire connects to the contact to the adjacent contact. Checkout the image of interest from the teardown:https://d3nevzfk7ii3be.cloudfront.net/igi/xELmUCaxYLuDnJln.huge