Patrick, looks like one of your Mosfets is missing. It appears to be a NTD60N02R 62 A, 24 V, N−Channel, DPAK. Once you can add some more information as requested, I could verify this information.
== Update ==
-
Patrick your board is a "Falcon" and according to the schematic, those are actually empty. See attached schematic and image.
+
Patrick your board is a "Falcon" All Xbox360 Premium machines and Arcade machines manufactured august 2007 should have it. Xbox360 packages with lot number 0734 or higher will most likely be Falcon machines.Benefits are bigger and enhanced CPU cooler and fewer voltage regulators, capacitors and inductors. According to the schematic, those spaces on the motherboard are actually empty. See attached schematic and image.
[image|282295|align=center]
[image|282296|align=center]
-
So, your board actually looks the way it should component wise, but it needs some cleaning;-) use some isopropyl alcohol and a soft toothbrush for that. Hope this helps, good luck.
+
So, your board actually looks the way it should, component wise, but it needs some cleaning;-) use some isopropyl alcohol and a soft toothbrush for that. Hope this helps, good luck.
Patrick, looks like one of your Mosfets is missing. It appears to be a NTD60N02R 62 A, 24 V, N−Channel, DPAK. Once you can add some more information as requested, I could verify this information.
== Update ==
Patrick your board is a "Falcon" and according to the schematic, those are actually empty. See attached schematic and image.
-
[image|282295]
+
[image|282295|align=center]
-
-
-
[image|282296]
+
[image|282296|align=center]
So, your board actually looks the way it should component wise, but it needs some cleaning;-) use some isopropyl alcohol and a soft toothbrush for that. Hope this helps, good luck.
Patrick, looks like one of your Mosfets is missing. It appears to be a NTD60N02R 62 A, 24 V, N−Channel, DPAK. Once you can add some more information as requested, I could verify this information.
+
== Update ==
Patrick your board is a "Falcon" and according to the schematic, those are actually empty. See attached schematic and image.
+
+
[image|282295]
+
+
+
+
[image|282296]
+
+
So, your board actually looks the way it should component wise, but it needs some cleaning;-) use some isopropyl alcohol and a soft toothbrush for that. Hope this helps, good luck.
Patrick, looks like one of your Mosfets is missing. It appears to be a NTD60N02R 62 A, 24 V, N−Channel, DPAK. Once you can add some more information as requested, I could verify this information.
+
== Update ==
+
+
Patrick your board is a "Falcon" and according to the schematic, those are actually empty. See attached schematic and image.
Patrick, looks like one of your Mosfets is missing. It appears to be a NTD60N02R 62 A, 24 V, N−Channel, DPAK. Once you can add some more information as requested, I could verify this information.