zero, see if this works for you.
[image|233986|align=left]
Insert the Sim door key in the small hole on the SD door and press it gently. Remove the SD door.
[image|233983|align=left]
Insert the SIM door key to the small hole on the SIM DOOR and press it gently. remove the SIM DoOR.
[image|233982|align=left]
Unscrew the TORX #2 screw.
[image|233984|align=left]
To release the Display Module, insert an opening tool to the top left corner of the device and slide to the direction shown in the image.
[image|233979|align=left]
Push the top end of the Body Assembly to the direction shown to release the top part of the display assembly.
[image|233985|align=left]
Release the left side of the body assembly by sliding the opening tool to the direction shown.
[image|233981|align=left]
Release the four clips on the right side. Do not slide an opening tool as it might damage the sidekey flex.
[image|233980|align=left]
Lift the top end of the display module up first. The display and the body assembly can now be separated.
Hope this helps, good luck