iFixit - Answers With Device "iPad 2 CDMA"

iPad 2 CDMA: iPad Reboots After ~5 minutes Following Digitizer Replacement

Tue, 30 Jul 2019 04:30:27 -0700

I recently repaired my first iPad digitizer. The part I ordered was said to be OEM grade. Following the repair the device seemed to work fine. After around 5-10 minutes of use it would shut off and reboot. Tried hard reset, restore, and even some random work arounds that were recommend to me. After restoring I was able to use the device for several minutes and didn’t have any issue. I let it sit for several hours and never had it reset. Returned the device to its owner and they said it started to do the same thing. My question is what could cause this and what I need to do to prevent it in the future.

⟐ Answer accepted julio 30, 2019 at 4:30 GMT-7

iPad 2 CDMA: LCD part number diferences

Tue, 11 Jun 2019 04:29:57 -0700

I would like to change the lcd in a 2nd generation ipad. The original part number on the back of the lcd is lp097x02-sln1. I know there is a lp097x02- slq1 as well. I do not know the difference. Will they interchange? could someone please explain to me the difference between them. I believe they are both 2nd generation lcd screens.

⟐ Answer accepted junio 11, 2019 at 4:29 GMT-7

iPad 2 CDMA: Home Button Doesn't Work - What is Home Flat?

Wed, 21 Nov 2018 09:13:01 -0700

A response elsewhere in this site suggested that a reason the home button may not work is that the damage causing a home flat may have occurred. I’ve never heard of this. What is home flat, and how is it repaired?

⟐ Edited by author noviembre 21, 2018 at 9:13 GMT-7

iPad 2 CDMA: Power, volume and mute not working after flex change

Tue, 04 Sep 2018 05:19:07 -0700

I changed the screen and digitiser, in doing this tore both the wifi and the power button ribbon.

I bought 2 power button ribbons from the US but neither of them work. Is there something I might be missing?

⟐ Answer accepted septiembre 04, 2018 at 5:19 GMT-7

iPad 2 CDMA: New screen not working

Tue, 19 Jun 2018 07:44:58 -0700

My ipad 2 suddenly stopped coming on. That is to say that the screen wouldn't power on or respond to the home button being pressed. When plugged into the computer, the device is recognised and if I didn't have a screen lock I'd be able to transfer data.

It was my thinking that the screen was broken and so I purchased a replacement screen for £20. It has a very sturdy and easy to fit cable, so I don't think I made any mistaked here, but the screen still does not come on.

Could this be a problem with the chipset, or perhaps by sheer bad luck did I buy a faulty replacement screen?

⟐ Answered junio 19, 2018 at 7:44 GMT-7

iPad 2 CDMA: blurred/blank screen trying to use safari. everything else is ok

Tue, 20 Feb 2018 01:43:49 -0700

Hi, everything works on my ipad except when I go to safari i get a blurred and blank screen. any ideas what the problem is?

⟐ Commented febrero 20, 2018 at 1:43 GMT-7

iPad 2 CDMA: Help with Logic Board: what is this diode/filter?

Fri, 22 Dec 2017 07:17:29 -0700

I was replacing the backlight diode and my soldering iron accidentally rubbed by the neighboring diode and took it off and I can't find it anymore. It is the small gray one directly in between the backlight ic and backlight filter labeled in this diagram: https://www.dhresource.com/0x0s/f2-albu-...

What is it and how can I obtain a replacement? Thanks!

⟐ Answer edited diciembre 22, 2017 at 7:17 GMT-7

iPad 2 CDMA: I have replaced the digitizer and wifi and celluar antennas, but now o

Wed, 15 Nov 2017 06:02:44 -0700

But it is now asking for a code to get into the pad and owner said there was no code on it when she was using it. Why is it now asking for one ? This ipad was bought as a refurbished one from apple. Thanks a whole bunch. Perry

⟐ Answer accepted noviembre 15, 2017 at 6:02 GMT-7

iPad 2 CDMA: My Ipad can't on and restore.

Sun, 30 Jul 2017 01:54:00 -0700

Hi, Recently I having this problem where my Ipad 2 can't be on. It keep stuck at the apple logo. So I thought it must the apple logo loop. So i try it with the tiny umbrelle to kick the device out of the recovery mode after I had set it to DFU mode. But it still can't work. So I have no choice but to decided to lost all the data inside my IPad 2 with restoring using the ITUNEs. However it still the same. The Itunes even show up some error code. Can anyone help me? Thanks.

⟐ Answer edited julio 30, 2017 at 1:54 GMT-7

iPad 2 CDMA: apple logo is stuck on my screen

Fri, 30 Jun 2017 06:31:13 -0700

apple logo is stuck on my screen

⟐ Answer accepted junio 30, 2017 at 6:31 GMT-7

iPad 2 CDMA: nand error code 430

Tue, 27 Sep 2016 17:45:18 -0700

i have error ipad, cant update or restore ipad 2.

there is something error

nand 430

i googling the error code, but there is no answer at all for my problem.

thanks for helping me.

⟐ Answered septiembre 27, 2016 at 17:45 GMT-7

iPad 2 CDMA: LCD dims altogether when fully seated or when digitizer gets close

Sun, 22 May 2016 10:24:44 -0700

I have an iPad 2 bought off eBay. After putting in a new logic board, it's either very dim or it goes dim once the digitizer is lowered (I'm powering this on to make sure all systems are good before adhering the glass to the device). Sometimes, the LCD will be fine but once I lower the digitizer, it dims or turns off. When I could get the digiziter down w/o it doing that, then I couldn't get slide the lock off. I doubt it's a broken digitizer as I've tried 2 others. I can't do the power +home button trick to reset or do the other reset. I've doublechecked that everything is sitting correctly in the case. The digitizer glass sits flush with the bevel.

I'm stumped and really don't want to buy any more parts. Any ideas? TIA.

⟐ Commented mayo 22, 2016 at 10:24 GMT-7

iPad 2 CDMA: Why my iPad is I am not use but the charge is down

Mon, 10 Jul 2023 00:47:41 -0700

Why my iPad not use but the charge is down

iPad 2 CDMA: iPad Model A1397 Internet connection not staying

Thu, 20 Aug 2015 13:02:29 -0700

My Ipad is a rebuilt job. But it is getting extra sluggish in connecting to our internet service and having trouble staying connected to our router at home.

⟐ Edited agosto 20, 2015 at 13:02 GMT-7

iPad 2 CDMA: Why does my screen have flickering red lines?

Tue, 18 Aug 2015 17:30:47 -0700

So, when I was disconnecting the lcd cable from the iPad, I may have broken one of the resistor/diode things on the board, but I am not sure. Now, there is a constant red lines across the whole screen when I turn it on. Is there any way to "jumper" this spot to fix the red screen issue? Thanks in advance for the help on the this forum. I greatly appreciate it!

The part that I may have potentially "broken" is the one in the blue box.

⟐ Commented agosto 18, 2015 at 17:30 GMT-7

iPad 2 CDMA: Ipad 2 A1397, 16 GB WiFi/Verizon: Black/cloudy screen with internet

Mon, 27 Jul 2015 10:59:37 -0700

I've searched the site but might not be smart enough to understand what I'm looking for. Whether I'm using the cell function or WiFi, it'll disconnect from the internet, going to a grayish-black, somewhat mottled screen. Then up comes the normal display within about five to ten seconds. All apps work, and nothing shuts off with apps even when I use them half an hour. Perfect display clarity, color, etc. Touch function works. Fully charged.

Downloaded update to OS via WiFi without any cut-out or shut-down.

What on earth is wrong with this thing? I read the whole process of dismantling an Ipad 2, and while I've never done that before, I'm totally game. However, I just don't know which part I should be replacing. Patient assistance for someone who only understands the guts of a PC is eagerly sought.

⟐ Edited julio 27, 2015 at 10:59 GMT-7