iFixit - Answers With Device "Kitchen Appliance"

Nespresso inissia: After power up both lights keep blinking forever

Sat, 03 Aug 2024 02:48:02 -0700

They never stop, onless you do it manually pressing both buttons. Actually yoy can make a warery expresso, pressing stop when your cup is near filling.

⟐ Commented Ağustos 03, 2024 at 2:48 GMT-7

Toaster: The prongs on plug and wire get hot.Is this bad?

Sat, 18 May 2024 14:05:26 -0700

The prongs on plug as well as the wire get hot. Is this bad?

⟐ Commented Mayıs 18, 2024 at 14:05 GMT-7

GE Microwave Oven: Door will not open after pushing door button

Tue, 27 Feb 2024 04:11:20 -0700

Microwave door will not open after pushing door button

⟐ Commented Şubat 27, 2024 at 4:11 GMT-7

Krups 963: steam leaking from the lid

Sun, 10 Sep 2023 15:03:18 -0700

steam is escaping from the lid

⟐ Answered Eylül 10, 2023 at 15:03 GMT-7

Starbucks Barista: Steam wand leaking. Not enough pressure for a good shot!

Thu, 10 Nov 2022 17:10:06 -0700

I'm not able to fully close down the steam wand. So, when the machine builds pressure to steam milk - or to pull a shot - the steam wand leaks and releases pressure. My machine is only a couple of years old, but this problem has been getting worse to the point that it's nearly unusable. The espresso I can make with this problem ranges from so-so to undrinkable.

⟐ Commented Kasım 10, 2022 at 17:10 GMT-7

Nutri Ninja BL450: Why does the blender get loud and smell?

Wed, 03 Jun 2026 12:18:04 -0700

The blender started being much louder and there is a burning smell coming out of the base. Where should I start if I want to fix it?

Should I order any parts? Or can I just maybe grease it somewhere?

⟐ Commented Haziran 03, 2026 at 12:18 GMT-7

Keurig Coffee Maker: Why won't the blue lights respond when I push them?

Sun, 11 Jan 2026 16:51:31 -0700

The machine powers on. The two lights are blue, but when I push either one to brew a cup, nothing happens. What might be the problem and how would I repair it?

⟐ Commented Ocak 11, 2026 at 16:51 GMT-7

Magic Bullet NutriBullet: Why does the NutriBullet leak?

Sun, 29 Mar 2026 13:14:30 -0700

There is spillage coming from my NutriBullet.

⟐ Commented Mart 29, 2026 at 13:14 GMT-7

Ninja NJ600: Why will my NJ600 not turn on?

Sun, 29 Sep 2019 09:22:35 -0700

I have the blender plugged in, and have made sure that there is no break in the power cord. The power light will not turn on, and the blender does not run when I try any of the buttons.

⟐ Commented Eylül 29, 2019 at 9:22 GMT-7

Melitta Caffeo Solo: Brewing unit won't go back in

Mon, 18 May 2026 01:32:11 -0700

The brewing unit of our Melitta Caffeo Solo did not going back in.

I found mentions of the motor not being properly aligned.

The official FAQ states: The motor might not be in the correct position. Check if the water tank is filled and if the drip tray is in place. Turn the appliance OFF and then ON again. Then simultaneously press the button for My-Coffee and the on/off button for more than 2 seconds. The motor will move into the correct position. Insert the brewing unit again and check that it is correctly locked in position.

However, this proposed solution did not reset the motor position in my case.

I found that the locking handle of the brewing unit moves a metal lever.

This metal lever engages a button in the machine.

By carefully pressing this button (i used the handle of a small spoon), the motor reset to the correct position.

Long story short: I don't have a question, and just wanted to post this here for future reference.

⟐ Commented Mayıs 18, 2026 at 1:32 GMT-7

Krups F203: How do you clean it?

Tue, 20 Feb 2018 09:51:27 -0700

The residue of the coffee beans is still in the grinder and hurting its effectiveness.

⟐ Answered Şubat 20, 2018 at 9:51 GMT-7

Oster 3905: Why aren't my levers staying down?

Wed, 19 Oct 2016 14:07:22 -0700

I was making toast and my toasting levers are not staying down. Ive tried just holding them down to turn on the toaster but that doesn't seem to be working. Is there any way to fix this or at least replace the part?

⟐ Answer accepted Ekim 19, 2016 at 14:07 GMT-7

Bamix Pro-3 NSFY: Motor is not working

Sat, 07 Feb 2026 12:45:39 -0700

I don't know what happened blender is not working and motor is not working

⟐ Commented Şubat 07, 2026 at 12:45 GMT-7

Breville BOV800XL toaster oven: Convection fan hums but doesn't turn.

Fri, 08 Aug 2025 14:53:37 -0700

The convection fan isn’t turning when trying to use the convection setting on the Breville toaster oven. Motor hums (60 Hz I believe) when trying to turn. Everything else works fine. Heating elements, display, etc.

Convection fan turns freely by blowing pressurized air across blades with power off or convection setting off. The fan will continue to spin for 30 seconds or more.

If the fan is spun initially and the convection function is then turned on, the fan quickly slows and stops.

⟐ Commented Ağustos 08, 2025 at 14:53 GMT-7

Cuisinart Smart Stick CSB-75: The lock/unlock button does not stay locked

Fri, 20 Feb 2026 13:48:55 -0700

just bought Cuisinart smart stick csb-75 and the lock/unlock button does not lock when pressed in.

⟐ Commented Şubat 20, 2026 at 13:48 GMT-7

Ninja Professional Blender 1100 watt: Why is the lid so hard to remove?

Mon, 03 Feb 2025 06:55:04 -0700

After using my Ninja blender, the lid is always stuck. I always have to ask my Dad to remove it. Why is it getting stuck after I make my smoothies?

⟐ Commented Şubat 03, 2025 at 6:55 GMT-7

Ninja Coffee Bar® Single-Serve System: Why does my Ninja brew more water than specified?

Wed, 12 Apr 2023 09:19:51 -0700

Classic Brew / Cup / 9.5oz specified / 12oz actual.

Classic Brew / XL Cup / 11.5oz specified / 15oz actual.

Classic Brew / Travel Mug / 14oz specified / 16oz actual.

⟐ Commented Nisan 12, 2023 at 9:19 GMT-7

Black and Decker PowerPro II FP1510: Food processor is not working

Fri, 08 May 2026 13:55:10 -0700

I got it as a gift but did not used it for over a year. Now when I want to use it, it does not work. Is there anything that I can look at, repair it myself, find out why it does not work?

Thanks

⟐ Commented Mayıs 08, 2026 at 13:55 GMT-7

Coffee Maker: Cuisinart dcc-1200 coffee pot thermal fuse temperature rating

Fri, 07 Jun 2024 08:07:48 -0700

What thermal fuse temperature rating do I need for replacement fuses?

⟐ Commented Haziran 07, 2024 at 8:07 GMT-7

Coffee Maker: Where can I find a replacement Lid for Starbucks Barista Aroma Grande

Sun, 24 Mar 2024 17:24:35 -0700

I need to replace my lid to the Starbucks Barista Aroma Grande Coffee Maker. Where do I go?

⟐ Answer edited Mart 24, 2024 at 17:24 GMT-7