⟐ Answered augustus 26, 2026 at 9:28 MST

⟐ Answer accepted augustus 26, 2026 at 7:57 MST

I have tried a few things, without much luck.

1. I’ve tried unplugging the system and letting it sit before plugging it back in.
2. I’ve tried rebuilding the database.
3. I’ve double-checked the power settings.

I held my ear close to the system during startup/shutdown near where the hard drive is, and the noise doesn’t seem to be originating from there.

The fact that it’s shutting down in sleep mode suggests that perhaps it’s a power supply issue. Has anybody else experienced this?

If it is in fact a power supply issue, how easily can I perform this repair myself?

⟐ Commented augustus 26, 2026 at 7:24 MST

⟐ Commented augustus 26, 2026 at 1:10 MST

In my case, it started happening occasionally, and after trying the power button several times it would eventually start normally. Now it happens every time.

I’m also wondering if this could be related to the power supply, overheating, or possibly the motherboard. If anyone has experienced the same symptoms and found a fix, I’d really appreciate some advice before I take it apart or send it for repair.

⟐ Answered augustus 26, 2026 at 0:18 MST

⟐ Commented augustus 26, 2026 at 0:13 MST

To my confusion, the problem wasn't solved. The new R1 button doesn't feel loose but it's still not clicking and it's still unresponsive from the side. So I assume something else is broken, but I can't identify what it is, so I'm wondering if anybody with expertise on the Steam Deck can help me here. I'm happy to order replacement parts and do the repairs myself, I just need to identify what the problem is!

⟐ Commented augustus 26, 2026 at 0:10 MST

⟐ Commented augustus 25, 2026 at 16:29 MST

My Little Brother struck the SD upside down in the slot and after 30 Min I GOT It out.It doesn't read any SD (no write protection problem), the SD is good (I checked on the PC) and It says that It cant read the SD.What can I do?

⟐ Answered augustus 25, 2026 at 14:58 MST

Can anyone recommend a retailer/manufacturer that can sell me replacements for the DPad and the DPad brace? One would think that places selling the DPad would also understand that the brace behind it is likely to break too...

⟐ Commented augustus 25, 2026 at 14:53 MST

- Replacing the old SSD with a brand-new SSD (thinking the old one failed)

- Completely reimaging SteamOS multiple times

- Clearing the appcache folder

- Running `steam --reset` in Konsole

Despite a brand-new SSD and fresh reimages, the exact same crashing behavior persists. Since desktop mode without Steam running is stable, what could be causing this persistent system-level crash?

⟐ Commented augustus 25, 2026 at 14:48 MST

Hopefully the video works! It's been making those sounds any time it vibrates. I think it's the motor but I don't know enough to be sure. Any suggestions?

⟐ Answer accepted augustus 25, 2026 at 10:00 MST

⟐ Answer edited augustus 25, 2026 at 7:01 MST

Has anyboday had any success in obtaining replacement ribbon cables for the steam machine? I contacted Steam / Valve, no help there. when searching for replacement it seems I'm not the first person to damage this cable!

⟐ Commented augustus 25, 2026 at 3:39 MST

The problem is, the console has no power. Doesn't respond to power button, eject button, stays off. PSU led is always orange. Here are the things i found: 1.8V standby is okay, 3.3V is okay too, at the power plug from pin 1-3 there is 0V, from pin4-7 there's 0.2V, that grows to 0.3V if plugged in, SMC_RESET_N at J2B1 PIN 6 is always low, no matter what, its at 0V. I tried to power it with my lab psu so i could find whether there's a short (thats potentially feeding back to the power connectors) but nothing. Still no life. The 3.3V is there at the RF Board so that's not the problem, the RF board also work on another motherboard. Already tried to reflow the NAND, Southbridge, and ANA to no success yet. Any ideas what could cause this? I'd appreciate any help! Thanks for reading!

EDIT: Forgot to mention, that i measured connectivity between J2B1 Pin 6, and all the points that are mentioned being connected to SMC_RESET_N, and all seems fine.

Pictures of no POST board:

Pictures of board that POSTS:

⟐ Commented augustus 25, 2026 at 1:32 MST

⟐ Answer edited augustus 24, 2026 at 23:42 MST

⟐ Answered augustus 24, 2026 at 14:39 MST

Now the pairing button does nothing. Using the Xbox app to go into settings and try pairing it doesn't work either. When I use a USB-C cable that works fine with my PC and controller, nothing happens. I took the Xbox apart and reseated the accessory board. When I pressed the pairing button, it flashed for a second and then stopped.

Between when it first broke and now, the Xbox sat unplugged for a few weeks. I tried updating both the Xbox and the controller, but that didn't help. The controller, as well as two others I tried, work perfectly fine with my PC over the same cable.

I also tried unplugging everything external just to test it: no fan, no disc drive, no front-panel USB, and no accessory module. Still nothing. There is no change in behavior. It won't sync over a cable or wirelessly.

When I plug the controller in, it vibrates once. If I press the Xbox button, it turns on but just keeps flashing as if it's searching for something to connect to.

Does anybody have any idea what could be causing this? $800 for a new one is a rip-off, and I really don't want to buy a used one filled with weed smoke for $400 on eBay when I bought this one new for $500 a few years ago.

⟐ Commented augustus 24, 2026 at 14:35 MST