iFixit - Answers With Device "Blender"

Magic Bullet: smoke and burning smell was coming out of my magic bullet

Mon, 10 Jan 2022 18:35:43 -0700

Some kind of smoke and burning smell was coming out of my magic bullet.It happened at my first time use.

Am I need to buy any special adapter for power , ?

Please advise am not in USA for repair and replacement.

Need your help to use my magic bullet properly.

Thanks in Advance

Srinath

⟐ Answered January 10, 2022 at 18:35 MST

Ninja Master Prep QB900B: Why won't the motor stop running when plugged in?

Mon, 10 Mar 2025 17:50:30 -0700

One day after normal use of blending, I pushed down the button to blend and then it never stopped running unless unlplugged.

I have disassembled the top motor portion and about a 1/4" diameter and 1/2" heigh spring fell out, but nothing else seemed obviously amiss.

Maybe I haven't found the right spot where the spring belongs and it had just worked loose, but I can't find a manual that shows where the spring should go.

I have tried putting the spring where the top piece contacts the bottom piece near the bottom side and near the top middle directly on the motor shaft. No luck.

⟐ Commented March 10, 2025 at 17:50 MST

Oster Blend-N-Go My Blend: Why is smoothie leaking into the base of the blender?

Tue, 12 Jul 2022 20:14:36 -0700

Every time I make a smoothie liquid leaks into the base of the blender? What should I do?

⟐ Commented July 12, 2022 at 20:14 MST

Blender: How to open casing on Braun stick blender

Tue, 22 Oct 2024 09:36:50 -0700

I want to extend the power lead but cant find screws or a wy toopen it.

⟐ Commented October 22, 2024 at 9:36 MST

Magic Bullet: Why is my Magic Bullet just humming, but the blades aren't turning?

Thu, 20 Jan 2022 09:52:39 -0700

When I lock my cup into the base, my blender just hums and the blades don't spin. I can hear the motor working but the blades don't turn.

⟐ Commented January 20, 2022 at 9:52 MST

BlendJet 2: How do you disassemble this blendJet 2?

Fri, 30 Jan 2026 08:51:50 -0700

My BlendJet 2 is not working at all No charging light comes on. I removed the three screws at the bottom and still cannot pry it out. Anyone who has disassembled this model in the past, please let me know how to take it apart.

⟐ Answered January 30, 2026 at 8:51 MST

Cuisinart Smart Stick CSB-75: The white piece in the motor seems to be damaged.

Wed, 24 May 2023 16:34:35 -0700

The white piece on my stick blender seems to be damaged. Is it worth fixing?

⟐ Commented May 24, 2023 at 16:34 MST

Magic Bullet NutriBullet: I need to replace the swich which.

Fri, 12 Aug 2022 09:13:09 -0700

One of the activators has been forced while it was stuck. This resulted in the perforation of the top of the small plastic cylinder which holds a spring. As a result the lach is loose and does not play its role of actionating the switch. I need to buy the broken parts. Where can I find it ?

⟐ Answered August 12, 2022 at 9:13 MST

Panasonic MX-SS40 Hand Blender: Where do I get spare parts for hand blender

Tue, 11 Mar 2025 21:27:19 -0700

Where do I get spare parts for hand blender

⟐ Commented March 11, 2025 at 21:27 MST

Ninja Professional Blender BL660: replacement coupling for my Ninja BL660

Sat, 20 May 2023 23:35:54 -0700

I need to replace the coupling on my Ninja BL660 1100. I cannot find one at the parts suppliers. Where can I get one?

⟐ Commented May 20, 2023 at 23:35 MST

Magic Bullet NutriBullet: How do I fix a broken spindle?

Sun, 01 Mar 2020 21:50:49 -0700

I turned on my NutriBullet RX with a spoon in it and it appears to have snapped the internal spindle that drives the blade. Can this be replaced?

Thanks

⟐ Answered March 01, 2020 at 21:50 MST

Ninja Master Prep QB900B: Where can I order spare parts?

Sat, 27 Jan 2024 14:47:11 -0700

Where can I order spare parts for my blender?

⟐ Answered January 27, 2024 at 14:47 MST

Magic Bullet NutriBullet: How do I replace the center plastic circle part that the blade attache

Tue, 17 Jan 2023 06:13:59 -0700

The center plastic circle that the blade and cup attaches to in order to begin spinning, broke off and I ordered a new part. That part needs to be threaded onto the centre motor piece, how is that done? That center nut and screw must undo correct?

⟐ Commented January 17, 2023 at 6:13 MST

KitchenAid KHB100OB: How to replace the motor (or perhaps just the fuse)?

Tue, 28 Sep 2021 05:09:05 -0700

My immersion blender shorted out. There was a flash of light inside the housing and now it will not work. Any ideas for how to replace the fuse, or perhaps the whole motor?

⟐ Commented September 28, 2021 at 5:09 MST

Magic Bullet MB1001B: Why won't my Magic Bullet crush ice?

Thu, 29 Oct 2015 09:33:13 -0700

The blades of my Magic Bullet are turning but are not actually crushing any of the ice inside, what do I do?

⟐ Answer accepted October 29, 2015 at 9:33 MST

Nutri Ninja BL450: Why is my blender overheating and smoking?

Mon, 29 Sep 2025 01:39:08 -0700

There is a strong smell of burning the last few times I've used the blender. Then when I take the cup off, it is smoking for a little bit. What is the issue?

⟐ Commented September 29, 2025 at 1:39 MST

Blendtec Total Blender: Where can I buy brushes for my blender?

Sat, 26 Jul 2025 07:31:51 -0700

The model number is ICB6

⟐ Commented July 26, 2025 at 7:31 MST

Cuisinart Smart Stick CSB-75: Repair or replace it?

Thu, 21 Dec 2023 00:02:37 -0700

The white plastic assembly attached to the motor shaft is broken, this is the part that drives the blade assembly. Is this a replaceable part by itself or just come with the motor? Model CSB-76

⟐ Answered December 21, 2023 at 0:02 MST

Blender: stripped gear connected from the base of the blender to the pitcher

Thu, 14 Oct 2021 20:05:07 -0700

My Ninja blender 10100 watt model BL700 30 will not blend when I have something in it but will spin when it is empty it will not even blend ice cream I believe it is stripped in the base gear or whatever you call the gear looking thing in the bass that connects to the picher.. apart to get it off an epoxy it or something but I can't figure out how to get it off

⟐ Answer accepted October 14, 2021 at 20:05 MST

KitchenAid Blender 5KSB52 Ultra Power Machine: My blender makes noises

Sat, 25 Sep 2021 09:54:54 -0700

my blended has stsrted making noises . By trying the the jar with another blender I found out that the noises dont come from the motor unit but from the blades unit . The blades are well tightened and aren't deformed . There is a drop or two leak during every time I use it.

⟐ Comment deleted September 25, 2021 at 9:54 MST